Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 110mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact linear tasks. The 10 mm bore uses an M5x0.8 air port and an M4x0.7 male rod thread. Its 110 mm stroke falls comfortably within the 200 mm standard limit. Because the barrel and rod are stainless, the riveted construction shrugs off mild corrosion better than painted alternatives in damp production areas. The rear U cover mounts at 90 degrees, routing the supply neatly for tight machine frames.
Built to ISO 6432 mounting dimensions, the body drops directly into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning. Plan for a safe working load of roughly 24 N, which lets you lift about 2 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to an -S variant.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U Is Used
PCB Reject Gate
Pushes small electronic boards off a test conveyor using 39.3 N of force, with the 90-degree U cover keeping the airlines flush against the machinery frame.
Label Applicator Tamp
Extends 110 mm to press adhesive labels onto light cartons, benefiting from the stainless build when deployed near washdown zones.
Lab Sample Diverting
Handles the routing of lightweight fluid vials, lifting roughly 2 kg safely while the fixed TPU bumpers prevent harsh stops at end positions.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U the Right Cylinder?
When sizing this 10 mm bore, compare it against its neighbours: an 8 mm version yields 25.1 N of push at 0.5 MPa, while stepping up to a 12 mm bore provides 56.5 N. This model hits a useful middle ground for light actuators. The U-style back cover orients the port 90 degrees to the piston axis, which helps when plumbing space is restricted. If your mechanism must stay put during an air loss or valve centre, remember this cylinder will drift; the TPU pads only soften the end of travel rather than locking the rod, so add an external pilot check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U FAQ
At 0.5 MPa it pushes with 39.3 N and pulls with 33 N. At 0.7 MPa the push is 55 N and the pull is 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8 and the male rod thread is M4x0.7.
No, this specific SKU does not include a magnet, so CMSG, DMSG or EMSG switches will not function. You must select the -S variant to enable position sensing. The body uses standard ISO 6432 mounting dimensions for easy bracket installation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.