Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 135mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke135 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact automation with ease. The Ø10 mm bore uses an M5x0.8 air port and an M4x0.7 male rod thread. Its riveted round-body construction pairs a stainless barrel and rod to resist mild corrosion and washdowns better than painted alternatives. Because it adheres to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises.
Fixed TPU bumper pads absorb impact at the stroke ends, while the included -S piston magnet supports CMSG, DMSG, and EMSG reed or electronic switches. For practical sizing, plan for a safe working load of about 24 N, which means it lifts roughly 2 kg vertically with a 2:1 safety margin. The CA rear pivot cover provides a clevis mount, and the 135 mm stroke operates smoothly between 30 and 800 mm/s.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA Is Used
Electronic Component Sorting
Pushes small PCBs or microchips down a testing lane using a safe 24 N working load, relying on the 135 mm stroke to clear adjacent tooling.
Light Carton Flap Folding
Folds thin cardboard flaps on compact packaging lines where the stainless body withstands light washdowns during cleaning cycles.
Lab Sample Diverting
Pivots sample tubes via the CA clevis mount, lifting roughly 2 kg cassettes vertically with a safe 2:1 margin at 0.5 MPa.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA the Right Cylinder?
When sizing this 39.3 N (at 0.5 MPa) unit, compare it against the smaller Ø8 bore, which offers 25.1 N of push, or step up to the Ø12 bore if you need 56.5 N. The 135 mm stroke is well within the 200 mm standard maximum for this bore, avoiding made-to-order delays. If your mechanism must hold a vertical load when air is removed or the valve is centred, this cylinder will drift; add an external rod lock or a pilot-operated check valve for secure positioning. The TPU bumpers only decelerate the end of travel and do not act as a brake.
The CA back cover supplies a rear pivot point for clevis mounting. Ensure you pair the internal magnet with compatible CMSG, DMSG, or EMSG sensors for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. This Ø10 mm bore utilizes an M5x0.8 air port and operates between 30 and 800 mm/s.
No, the piston will drift if air pressure is lost or the valve is centred; the fixed TPU bumper pads only decelerate the stroke end and do not lock the rod. Use an external rod lock or pilot check valve for holding. It features a CA rear pivot clevis and uses standard ISO 6432 mounting dimensions for easy bracket integration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X135SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.