Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles 150 mm strokes with an M5x0.8 air port. The riveted round body and Ø4 mm rod shrug off mild corrosion, outlasting painted alternatives in damp production zones. Its ISO 6432 mounting dimensions drop directly into standard mini-cylinder brackets.
The integrated -S piston magnet supports CMSG, DMSG and EMSG switches for position sensing. Fixed TPU bumper pads absorb stroke-end impact without adding bulk. Plan for roughly 24 N of actual work at 0.5 MPa, which translates to lifting about 2 kg vertically with a safe 2:1 margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB Is Used
PCB Shuttle Routing
Pushes lightweight circuit board trays along a 150 mm guide track using a safe 24 N working load, relying on the stainless rod to resist flux humidity.
Film Roll Deflection
Maintains tension on thin packaging film via the CA pivot clevis, absorbing end-of-stroke impact through fixed TPU pads without scratching the web.
Lab Dispenser Trigger
Actuates a 2 kg reagent pump valve, using the -S magnet and an EMSG sensor to confirm the 150 mm extension before dispensing.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB the Right Cylinder?
For lighter duties, the Ø8 bore provides 25.1 N push at 0.5 MPa, whereas stepping up to the Ø16 bore yields 100.5 N if your payload exceeds this unit's 2 kg vertical lift equivalent. The included LB foot bracket secures the body, while the CA rear pivot cover accommodates clevis mounting. Because air pressure alone cannot arrest a dropped load, fit an external rod lock or pilot check valve to prevent drifting when the valve centres.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB FAQ
This Ø10 mm bore cylinder features an M5x0.8 port and a Ø4 mm rod. It generates 39.3 N push and 33 N pull at 0.5 MPa, 55 N push and 46.1 N pull at 0.7 MPa, with a theoretical maximum of 8 kgf at 1.0 MPa.
No, the fixed TPU bumper pads only decelerate the stroke end and do not act as a brake; you need a pilot check valve to hold a suspended load. This SKU includes an LB foot bracket and a CA rear pivot cover, conforming to ISO 6432 mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X150SCALB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.