Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact automation tasks effortlessly. The riveted round-body construction pairs a corrosion-resistant barrel and rod with fixed TPU bumper pads that absorb end-of-stroke impacts. Because the bore is 10 mm, it uses an M5x0.8 air port and an M4x0.7 male rod thread. An integrated piston magnet (-S) allows precise position detection with CMSG, DMSG or EMSG switches.
Designed to the ISO 6432 mounting interface, the unit drops directly into standard mini-cylinder brackets and clevises. The CA rear pivot cover and TC trunnion accessory supply flexible mounting options for complex linkages. In practical terms, you can plan for roughly 24 N of usable work at 0.5 MPa, or expect it to lift about 2 kg vertically with a safe 2:1 margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC Is Used
Electronic Component Sorting
Actuates diverter gates on PCB assembly lines, using the 2 kg vertical lift capacity to push lightweight trays into inspection lanes.
Packaging Deflection
Extends 200 mm to route small plastic bottles on a conveyor, relying on the TC trunnion to handle slight angular misalignment during the push.
Lab Sample Ejection
Ejects filled vials from a testing carousel, where the stainless-steel rod resists mild chemical splashes and the -S magnet confirms ejection via a DMSG sensor.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC the Right Cylinder?
When sizing this 10 mm bore actuator, compare your actual load against its 33 N pull force at 0.5 MPa. If your mechanism demands less force, step down to the 8 mm bore (18.8 N pull); if you need more authority, the 12 mm bore provides 42.4 N pull. This 200 mm stroke is the maximum standard length for the 10 mm bore, so ensure your guiding structure prevents rod bending under lateral stress. Remember that a standard cylinder drifts when air is removed or a valve centres—the bumpers only decelerate the stroke end, so add an external rod lock or pilot check valve if you must hold a vertical load safely in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
No, a standard double-acting cylinder drifts if air pressure drops or the valve is centred; the fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You must fit an external rod lock or pilot check valve to hold a vertical load. The -S magnet allows CMSG, DMSG and EMSG sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X200SCATC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.