Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 25mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact actuation where space is tight. The Ø10 mm bore uses an M5x0.8 air port and an M4x0.7 male rod thread. Its riveted round-body construction shrinks the footprint while the stainless barrel and rod shrug off mild corrosion better than painted alternatives in damp production areas.
Because the ISO 6432 mounting interface matches standard mini-cylinder brackets, this unit drops cleanly into existing clevis setups. The built-in piston magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing. For practical sizing, plan for roughly 24 N of real work at 0.5 MPa, which means it lifts about 2 kg vertically with a safe 2:1 margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB Is Used
Electronic Component Sorting
Actuates a small diverter gate on a PCB assembly line, using the 39.3 N thrust to flick miniature relays into the correct bin.
Blister Pack Sealing
Provides the precise 25 mm downward stroke to press a heated sealing head against pharmaceutical blister foil.
Label Applicator Tamp
Pushes a 2 kg label tamp head forward to apply adhesive labels to small cosmetic cartons on a conveyor.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB the Right Cylinder?
If 39.3 N at 0.5 MPa is too much, step down to the Ø8 bore (25.1 N push); if you need more muscle, the Ø12 bore pushes 56.5 N. This SKU includes a CA rear pivot cover and an SDB pivot-block for articulated mounting. Note that a standard cylinder drifts if air pressure drops or the valve centres—the fixed TPU bumper pads only soften the stroke end, so add an external rod lock or pilot check valve to hold a suspended load. The 25 mm stroke keeps rod bending stress minimal even under slight side-loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB FAQ
At 0.5 MPa it pushes 39.3 N and pulls 33 N. At 0.7 MPa it pushes 55 N and pulls 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG switches. It features an ISO 6432 mounting interface, comes with a CA rear pivot cover, and includes an SDB pivot-block for articulated installations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X25SCASDB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.