Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 30mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact actuation where mild corrosion or washdown is a concern. The Ø10 mm bore uses an M5x0.8 air port and a Ø4 mm piston rod with an M4x0.7 male thread. Because the bore falls within the Ø8-Ø25 range, it shares the ISO 6432 mounting interface, dropping smoothly into standard mini-cylinder brackets and clevises.
The riveted round body incorporates fixed TPU bumper pads to soften stroke-end impact without adding an adjustable cushion. This specific SKU includes a built-in piston magnet for CMSG, DMSG or EMSG reed and electronic switches. For real-world work at 0.5 MPa, plan for roughly 24 N of usable load, which translates to lifting about 2 kg vertically with a 2:1 safety margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC Is Used
PCB Pick-and-Place
Ideal for small electronic assembly arms needing precise 30 mm travel to position delicate components on circuit boards.
Label Dispenser Gate
Provides the short, repeatable stroke required to index adhesive labels in damp or washdown packaging lines.
Lab Sample Diverting
The stainless body withstands chemical exposure in laboratory automation while deflecting sample vials with a 39.3 N push.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC the Right Cylinder?
When sizing this 10 mm bore against its neighbours, step down to the Ø8 for lighter duties (25.1 N push at 0.5 MPa) or move up to the Ø12 for heavier cycles (56.5 N push at 0.5 MPa). This unit features a CA pivot clevis back cover and a TC trunnion mounting accessory, giving you flexible pivot options. Remember that venting the air supply or centering the valve causes the piston to drift; the TPU bumpers only decelerate the end of stroke and will not lock the load. For suspended weights, add an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC FAQ
This double-acting cylinder has an M5x0.8 port. It generates 39.3 N push and 33 N pull at 0.5 MPa, 55 N push and 46.1 N pull at 0.7 MPa, with a theoretical maximum of 8 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in magnet for CMSG, DMSG or EMSG switches. The TC trunnion mount pairs with the CA clevis back cover to allow pivoting, and the body uses standard ISO 6432 mounting dimensions for easy bracket matching.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X30SCATC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.