Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact 35 mm stroke tasks with reliable precision. The riveted round body uses a 4 mm piston rod and an M5x0.8 port, while the rear CA pivot cover provides a clevis mount for angled articulation.
Because the stainless barrel and rod resist mild corrosion and washdown, this unit outlasts painted alternatives in damp environments. Its dimensions match the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets. Plan for roughly 24 N of actual work at 0.5 MPa, which lets you lift about 2 kg vertically with a safe 2:1 margin. Fixed TPU bumper pads absorb stroke-end impact, though this SKU lacks a magnet and cannot host CMSG, DMSG or EMSG sensors.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA Is Used
Small Component Ejection
Pushes lightweight plastic parts out of an injection mould with 39.3 N at 0.5 MPa, using the 35 mm stroke to clear the die face quickly.
Package Deflection Gate
Actuates a short diverter arm on a packaging line, where the CA clevis accommodates the swing arc and the stainless body resists humidity.
Lab Sample Sorting
Indexes test tubes into a testing carousel with a 2 kg vertical lift capacity, benefiting from the compact 10 mm bore in tight lab automation.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA the Right Cylinder?
If you need less force than the 39.3 N push at 0.5 MPa, the smaller Ø8 bore provides 25.1 N; stepping up to the Ø16 bore yields 100.5 N for heavier mechanisms. Remember that a plain cylinder drifts if air pressure drops or the valve centres—the TPU pads only decelerate the stroke end, so add an external rod lock or pilot check valve to hold a suspended load. The CA rear clevis suits pivoting loads, and you can swap to LB foot or FA flange mounts if your frame requires fixed positioning. For a 35 mm stroke, side-load stress on the 4 mm rod is minimal, but keep the load guided to prevent bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA FAQ
At 0.5 MPa it pushes 39.3 N and pulls 33 N. At 0.7 MPa it pushes 55 N and pulls 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
No, this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG switches. You would need the -S magnet variant for sensing. It uses fixed TPU bumper pads for end-stop deceleration, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.