Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact automation tasks with ease. The riveted round-body construction pairs a corrosion-resistant barrel and Ø4 mm rod, making it highly suitable for damp or washdown environments where painted alternatives fail. Because it features a built-in piston magnet, the unit is fully compatible with CMSG, DMSG and EMSG reed or electronic switches for precise end-of-stroke detection.
The Ø10 mm bore utilises an M5×0.8 air port and an M4×0.7 male rod thread, conforming to the ISO 6432 mounting interface so it drops directly into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb the impact at the stroke ends, while the U-style back cover provides a 90-degree port orientation for tight spatial constraints. For practical sizing, plan for a safe working load of roughly 24 N, which means it can comfortably lift about a 2 kg part vertically with a 2:1 safety margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU Is Used
PCB Component Placement
Uses the 39.3 N extend force to push lightweight electronic pickups, while the CMSG sensor confirms the 35 mm stroke completion for high-speed board assembly.
Blister Pack Sealing Jig
The stainless steel construction survives humid packaging lines, applying precise 33 N retraction force to hold film webs during heat sealing operations.
Lab Sample Dispenser
Leveraging the 2 kg vertical lift capacity, this unit actuates a small dosing valve for reagent dispensing, with the U cover keeping the M5×0.8 port tucked neatly sideways.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU the Right Cylinder?
When sizing this 35 mm stroke unit, compare its 39.3 N push force at 0.5 MPa against the smaller Ø8 bore, which offers 25.1 N, or step up to the Ø12 bore providing 56.5 N if your payload is heavier. The included magnet enables position sensing, but remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centred; the TPU bumpers only decelerate the stroke end and do not function as a locking brake. To suspend a load safely during an emergency stop, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull, increasing to 55 N push and 46.1 N pull at 0.7 MPa, with a theoretical maximum of 8 kgf at 1.0 MPa. The air port is M5×0.8, the rod is Ø4 mm, and it operates at speeds between 30 and 800 mm/s.
The stainless-steel barrel and rod offer excellent mild corrosion resistance for damp environments, and the ISO 6432 mounting dimensions ensure easy bracket fitting. However, it does not hold position on air loss; you must add an external rod lock or pilot check valve for load holding, as the fixed TPU bumpers only decelerate the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X35SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.