Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact 50 mm strokes with precision. The riveted stainless barrel and Ø4 mm rod shrug off mild washdown and damp environments where painted bodies corrode. It breathes through an M5x0.8 port and features a built-in magnet for CMSG, DMSG or EMSG switches.
Designed to ISO 6432 mounting dimensions, the Ø10 mm body drops directly into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb stroke-end impact without the tuning an adjustable cushion demands. In practice, plan for roughly 24 N of actual work at 0.5 MPa, which means it lifts about 2 kg vertically with a 2:1 safety margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB Is Used
PCB Pusher Pins
Ejects delicate printed circuit boards from test fixtures using a gentle 39.3 N push force, preventing trace damage during automated unloading.
Blister Pack Flap Tucking
Tucks cardboard flaps on small pharmaceutical blister packs with a 50 mm stroke, where the stainless body resists daily wipe-down chemicals.
Light Part Ejection
Pushes 2 kg plastic moulded components out of an injection press using the SDB pivot block to absorb slight angular misalignment.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB the Right Cylinder?
This Ø10 bore sits between the smaller Ø8 (25.1 N push) and the larger Ø12 (56.5 N push), giving you a clear upgrade path if your 50 mm stroke needs more or less force. The included SDB pivot block pairs with the CA rear clevis to handle angular rod misalignment during extension. Because this SKU includes the -S magnet, you can mount position sensors directly.
Remember that fixed bumpers only decelerate the stroke end; they do not act as a brake. If air pressure drops or the valve centres, the piston will drift and drop the load. To hold a vertical part securely, add an external rod lock or a pilot-operated check valve to your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB FAQ
At 0.5 MPa it pushes 39.3 N and pulls 33 N. At 0.7 MPa it pushes 55 N and pulls 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8 and the male rod thread is M4x0.7.
The -S suffix means it has a piston magnet for CMSG, DMSG or EMSG switches. While it can lift about 2 kg with a 2:1 margin, it lacks a holding brake. The piston drifts if air is lost, so use a pilot check valve for suspended loads. The CA clevis and SDB block provide pivoting mount options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X50SCASDB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.