Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 5mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles short 5 mm strokes with precision. The riveted barrel and rod resist mild corrosion, making it superior to painted alternatives in damp environments. Because the bore is 10 mm, it uses an M5x0.8 port and an M4x0.7 male rod thread. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG position switches.
For practical sizing, plan for a real work load of roughly 24 N at 0.5 MPa, which safely lifts about 2 kg vertically with a 2:1 margin. The CA rear pivot cover allows direct clevis mounting, while fixed TPU bumper pads absorb the stroke-end impact. Note that bumpers only decelerate the piston; they do not function as an adjustable air cushion.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA Is Used
Gripper Jaw Actuation
Provides the short 5 mm stroke and 39.3 N force needed to open and close small pneumatic gripper jaws on pick-and-place robotic arms.
Small Part Ejection
Pushes lightweight plastic or metal components out of machining fixtures using a compact 2 kg safe vertical lift capacity.
Lab Dispenser Triggering
Taps liquid dispensing valves in laboratory automation, where the stainless body resists humidity and the CA clevis accommodates angular movement.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA the Right Cylinder?
When sizing this 10 mm bore, dropping down to an 8 mm version reduces the push force to 25.1 N at 0.5 MPa, whereas stepping up to a 12 mm bore increases it to 56.5 N. The 5 mm stroke is extremely short, which minimizes rod bending risks but requires precise mounting alignment. The CA pivot back cover is ideal for articulating mechanisms, and the -S magnet enables electronic or reed sensor tracking.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the TPU bumpers cannot lock the load. If your application requires strict position holding on air loss, add an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA FAQ
This 10 mm bore cylinder features an M5x0.8 air port and generates 39.3 N push / 33 N pull at 0.5 MPa, 55 N push / 46.1 N pull at 0.7 MPa, with a theoretical maximum of 8 kgf at 1.0 MPa.
Yes, the 10 mm bore conforms to ISO 6432 mounting dimensions for easy bracket interchangeability. The included -S piston magnet allows CMSG, DMSG and EMSG sensors to track position, while the CA cover provides a rear clevis mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X5SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.