Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact actuation where mild corrosion or washdown is a concern. The Ø10 mm bore features an M5x0.8 air port and a 60 mm stroke, relying on fixed TPU bumper pads to decelerate the stroke end. Because it follows ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises.
For practical sizing, plan for about 24 N of real work at 0.5 MPa, which translates to lifting a 2 kg part vertically with a safe 2:1 margin. The riveted round body keeps the unit light, and the built-in magnet (-S) supports CMSG, DMSG and EMSG position switches.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC Is Used
Electronic Component Sorting
Pushes lightweight PCBs or connectors along a conveyor lane using a safe 24 N working load at 0.5 MPa.
Small Carton Flap Folding
Extends 60 mm to tuck cardboard flaps on a packaging line, benefiting from the washdown-resistant stainless build.
Lab Sample Diverting
Pivots via the CA clevis to route test tubes on a diagnostic carousel, lifting roughly 2 kg loads vertically.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC the Right Cylinder?
When sizing this 60 mm stroke model, compare it against its neighbours: the Ø8 bore offers 25.1 N of push at 0.5 MPa, while the Ø12 bore steps up to 56.5 N. If your payload requires holding position during air loss or valve centering, note that the piston will drift, as the TPU bumpers only soften the stroke end rather than locking the rod; an external pilot check valve or rod lock is required for secure load holding.
This configuration includes a CA rear pivot cover for clevis mounting and a TC trunnion accessory. The 60 mm stroke is well within the 200 mm maximum standard stroke for this bore, but ensure your guiding structure handles any potential side-load to prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC FAQ
This Ø10 mm bore cylinder features an M5x0.8 air port. It generates 39.3 N push and 33 N pull at 0.5 MPa, 55 N push and 46.1 N pull at 0.7 MPa, with a theoretical maximum of 8 kgf at 1.0 MPa.
The base MI uses fixed TPU bumper pads to decelerate the stroke end, not an adjustable air cushion. However, the -S suffix indicates a built-in magnet, allowing you to mount CMSG, DMSG or EMSG reed and electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60SCATC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.