Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact actuation with ease. The riveted round-body construction pairs a corrosion-resistant barrel and rod with fixed TPU bumper pads that absorb stroke-end impact, making it superior to painted alternatives in damp environments. It features a 90-degree U back cover and an M5x0.8 port.
Designed to the ISO 6432 mounting interface, the Ø10 mm body drops directly into standard mini-cylinder brackets and clevises. Plan for a safe working load of about 24 N at 0.5 MPa, which means it can vertically lift roughly 2 kg with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U Is Used
PCB Ejector Pins
Provides the 39.3 N push force needed to safely dislodge delicate printed circuit boards from test fixtures without marring surfaces.
Package Diverters
Uses its 60 mm stroke and 90-degree U cover to actuate lightweight routing gates on small-package conveyor lines.
Lab Sample Handling
The stainless-steel build withstands humid laboratory environments while lifting roughly 2 kg sample trays vertically.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U the Right Cylinder?
When sizing this 60 mm stroke model, compare it against its neighbours: the Ø8 bore offers 25.1 N of push at 0.5 MPa, while stepping up to the Ø12 bore provides 56.5 N. If your application requires position holding, remember that a plain cylinder drifts when air is lost or the valve is centred—the TPU bumpers only decelerate the end of the stroke and act as neither a lock nor a brake. For secure load holding, integrate an external rod lock or a pilot-operated check valve. Furthermore, because this configuration lacks the -S magnet, it cannot support magnetic switches; you will need the -S version for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U FAQ
This double-acting cylinder delivers a push of 39.3 N and a pull of 33 N at 0.5 MPa. At 0.7 MPa, the push is 55 N and the pull is 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa, and the air port is M5x0.8.
Yes, the Ø10 mm body conforms to ISO 6432 mounting dimensions, so it fits standard mini-cylinder clevises and brackets. However, because this specific SKU lacks a magnet, it cannot accept CMSG, DMSG or EMSG switches; you must specify the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X60U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.