Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 65mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke65 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact actuation with ease. The Ø10 mm bore operates on an M5x0.8 port, while the CA rear pivot cover provides a robust clevis mount for angled linkage drives. An integrated piston magnet (-S) supports CMSG, DMSG and EMSG position switches.
Its stainless barrel and rod resist mild corrosion, outperforming painted alternatives in damp or washdown settings. The riveted body uses fixed TPU bumper pads to decelerate the stroke end. Plan for roughly 24 N of actual work at 0.5 MPa, which means it lifts about 2 kg vertically with a safe 2:1 margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA Is Used
Electronic Component Sorting
Pushes small PCBs or microchips along a conveyor lane using a precise 39.3 N thrust guided by a DMSG sensor.
Light Carton Flap Folding
Swings a small arm via the CA clevis to tuck flaps on thin cardboard boxes in a washdown-capable packaging line.
Lab Sample Diverting
Pivots a gate to route vials on a testing carousel, benefiting from the stainless rod's resistance to mild chemical splashes.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA the Right Cylinder?
When sizing this 39.3 N (0.5 MPa) unit, note the smaller Ø8 bore yields 25.1 N, whereas the larger Ø12 provides 56.5 N if you need more thrust. The 65 mm stroke is well within the 200 mm maximum, but long rods invite side-load bending, so keep the load guided. Because this SKU includes the magnet, it is fully ready for CMSG, DMSG or EMSG sensors.
Remember that venting the air supply causes the piston to drift, as the TPU bumpers only soften end impacts rather than locking the rod. To prevent a suspended payload from dropping, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA FAQ
It provides 39.3 N push and 33 N pull at 0.5 MPa, or 55 N push and 46.1 N pull at 0.7 MPa, with a theoretical maximum of 8 kgf at 1.0 MPa. The air port is M5x0.8.
No, it uses fixed TPU bumper pads to decelerate the stroke end. The riveted stainless body conforms to ISO 6432 mounting dimensions, and the -S magnet enables CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.