Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 65mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke65 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles light-duty positioning with a 65 mm stroke. The riveted barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp production areas. It features a 90-degree U back cover and an M5x0.8 port.
Because the bore generates 39.3 N at 0.5 MPa, you can plan for a safe working load of roughly 24 N, which equates to lifting about 2 kg vertically with a 2:1 margin. The Ø10 mm body uses the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U Is Used
Electronic Component Sorting
Deflects lightweight PCBs and resistors on a conveyor using a 65 mm stroke, where the 39.3 N push force easily moves delicate parts without crushing them.
Small Carton Flap Folding
Pivots a 90-degree U cover arm to tuck end flaps on small pharmaceutical boxes, relying on the stainless build to withstand occasional washdown.
Lab Tube Ejection
Pushes plastic test tubes out of a centrifuge carousel, lifting roughly 2 kg of combined tube weight vertically with a safe 2:1 margin.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U the Right Cylinder?
When sizing this 10 mm bore, stepping down is not an option as it is the smallest standard MI, while stepping up to the Ø12 bore raises the push force to 56.5 N at 0.5 MPa. If your machine loses air or the valve centres, this plain cylinder will drift and cannot hold a load; the fixed TPU bumper pads only decelerate the stroke end rather than acting as a brake. For secure positioning, add an external rod lock or a pilot-operated check valve.
The 90-degree U back cover suits compact pivot mounts, and you can pair the body with LB foot, FA flange or TC trunnion hardware. With a 65 mm stroke, keep side loads minimal to avoid bending the Ø4 mm piston rod. If you need position feedback, select the -S magnet version to enable reed or solid-state switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum is 8 kgf at 1.0 MPa. The air port is M5x0.8 and the male rod thread is M4x0.7.
This SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG switches; you need the -S variant for sensing. However, the Ø10 mm round body uses standard ISO 6432 mounting dimensions, so it drops into standard mini-cylinder brackets and clevises seamlessly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X65U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.