Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation tasks with ease. The Ø10 mm bore operates on an M5x0.8 port, and the 75 mm stroke falls well within the 200 mm standard limit. Riveted stainless construction resists mild corrosion, giving it an edge over painted alternatives in damp environments. A built-in piston magnet supports CMSG, DMSG and EMSG switches for position detection.
Because the theoretical thrust equals 8 kgf at 1.0 MPa, you can plan for a safe working load of roughly 24 N in continuous use. That translates to lifting about 2 kg vertically with a 2:1 safety margin. The U back cover provides a 90-degree port orientation for tight routing. Fixed TPU bumper pads absorb end-of-stroke impacts, keeping the 30-800 mm/s operating speed controlled without adjustable cushioning.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU Is Used
Electronic Component Sorting
Uses the 39.3 N push force at 0.5 MPa to deflect small PCBs on a conveyor, relying on the built-in magnet for DMSG sensor confirmation.
Light Carton Flap Folding
The 75 mm stroke extends to fold lightweight cardboard flaps, while the U 90-degree back cover keeps air lines neatly tucked in tight packaging cells.
Lab Sample Diverting
Stainless steel barrel and rod withstand humid lab environments, safely pushing 2 kg sample racks with the fixed TPU bumpers ensuring quiet operation.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU the Right Cylinder?
When sizing this 10 mm bore, compare it against the smaller Ø8 option, which drops to 25.1 N of push at 0.5 MPa, or the larger Ø16 bore that jumps to 100.5 N. If your load requires holding position during air loss, remember that the piston drifts without air pressure; the bumpers only decelerate the stroke end rather than acting as a brake. You must add an external rod lock or pilot check valve for secure load holding.
This SKU includes the -S magnet for electronic or reed sensors and features a U-type 90-degree rear cover. The male M4x0.7 rod thread and ISO 6432 mounting dimensions simplify bracket selection. For a 75 mm stroke, ensure your guiding structure prevents side loads to avoid rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU FAQ
This double-acting cylinder pushes 39.3 N and pulls 33 N at 0.5 MPa. At 0.7 MPa, push is 55 N and pull is 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. It uses an M5x0.8 air port and operates at speeds between 30-800 mm/s.
Yes, the 10 mm bore uses standard ISO 6432 mounting dimensions for easy bracket integration. The -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG switches along the body for precise position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.