Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles light actuation with a 75 mm stroke. The riveted round body uses a Ø4 mm piston rod and M5x0.8 port, engineered to run at speeds between 30 and 800 mm/s. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments.
Because the bore is Ø10 mm, it conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches. Factoring in friction and dynamics, plan for a safe working load of roughly 24 N at 0.5 MPa; in vertical lift scenarios, that translates to hoisting about 2 kg with a 2:1 safety margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U Is Used
Electronic Component Ejection
Pushes small PCBs out of test fixtures with 39.3 N of force, where the stainless body withstands flux residues and cleaning solvents.
Packaging Diverter Arm
Actuates a lightweight routing flap for small cartons on a packaging line, using the 90-degree U cover to keep the air line tucked away.
Lab Sample Handling
Indexes plastic sample tubes between stations with a 75 mm travel, relying on the smooth washdown-ready stainless barrel.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U the Right Cylinder?
If 39.3 N is excessive for your fixture, the smaller Ø8 bore offers 25.1 N, while stepping up to a Ø16 bore provides 100.5 N at the same 0.5 MPa. This model features the U back cover, orienting the port 90 degrees to the body to simplify hose routing in confined spaces. The fixed TPU bumper pads soften impact at the stroke ends but only decelerate the piston; they do not act as a brake. If the application requires the rod to stay put during air loss or valve centring, the piston will drift, so you must fit an external rod lock or a pilot-operated check valve. For a 75 mm stroke, ensure the front and rear mounts are aligned to prevent side-loading and rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U FAQ
At 0.5 MPa it provides 39.3 N push and 33 N pull. At 0.7 MPa it provides 55 N push and 46.1 N pull. The theoretical maximum is 8 kgf at 1.0 MPa. The air port is M5x0.8 and the male rod thread is M4x0.7.
Yes, the Ø10 mm body uses standard ISO 6432 mounting dimensions, so it fits common clevises and foot brackets. However, because this specific SKU lacks the internal magnet, it cannot accept CMSG, DMSG or EMSG switches; you would need the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X75U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.