Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U is a genuine double acting round-body mini air cylinder with a Ø12mm bore and 110mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ12 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U
Generating 56.5 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles light-duty positioning with a 110 mm stroke. The riveted round body uses a stainless barrel and rod to resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Its M5x0.8 port and M6x1.0 male rod thread keep the envelope compact.
Because the Ø12 bore conforms to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises. For practical sizing, plan for about 34 N of real work at 0.5 MPa, which means it lifts roughly 2.9 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb the stroke-end impact, and the U rear cover provides a 90-degree port orientation for tight installations.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø12 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 12 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U Is Used
Electronic Component Sorting
Pushes small electronic parts along a conveyor lane using a safe 34 N working load, preventing damage to delicate PCBs during transfer.
Small Carton Flap Folding
Cycles a 110 mm stroke to fold light cardboard flaps on a packaging line, where the stainless body withstands occasional washdowns.
Lab Sample Diverting
Actuates a diverter gate for specimen tubes, lifting mechanisms under 2.9 kg with a 2:1 vertical lift safety margin.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U the Right Cylinder?
When sizing this 110 mm stroke model, compare it against its neighbours: the Ø10 bore yields 39.3 N of push at 0.5 MPa, while the Ø16 bore steps up to 100.5 N. If your mechanism drifts when air is removed or the valve is centred, remember this base cylinder does not lock the piston; the TPU pads only decelerate the end of travel. You must add an external rod lock or pilot check valve to hold a suspended load.
The U back cover orients the air supply at 90 degrees, which helps clear side-mounted machinery. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG sensors. If you need position feedback, select the -S variant. For a 110 mm stroke, ensure your guiding structure prevents side-load rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U FAQ
This double-acting cylinder has an M5x0.8 port and generates a push of 56.5 N and a pull of 42.4 N at 0.5 MPa. At 0.7 MPa, push is 79.1 N and pull is 59.4 N. The theoretical maximum force is 11.5 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must choose the -S variant to use CMSG, DMSG or EMSG switches. The unit features fixed TPU bumper pads for end-of-stroke deceleration and uses an ISO 6432 mounting interface for standard brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI12X110U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.