Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU is a genuine double acting round-body mini air cylinder with a Ø12mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ12 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU
Delivering 56.5 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact 60 mm strokes with a 6 mm piston rod. The riveted round body uses an M5x0.8 port and relies on fixed TPU bumper pads to soften end-of-stroke impacts. Because the bore is Ø12, it conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises. The stainless barrel and rod also resist mild corrosion, giving it an edge over painted alternatives in damp or washdown environments.
Equipped with a piston magnet, this unit supports CMSG, DMSG and EMSG switches for position sensing. For real work at 0.5 MPa, plan for about 34 N of usable load rather than the absolute maximum. In vertical lifting scenarios, that translates to safely raising roughly 2.9 kg when applying a 2:1 safety margin. The U back cover provides a 90-degree port orientation, simplifying hose routing in tight machinery.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø12 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 12 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU Is Used
Electronic Component Sorting
Pushes small electronic parts down a 60 mm chute with 56.5 N of force, using the U cover to keep air lines neatly tucked beside the machine frame.
Lab Dispenser Actuation
Drives a precision valve for chemical dosing where the stainless body resists mild corrosion from ambient humidity and occasional solvent splashes.
Small Parts Ejection
Ejects 3D-printed plastic parts from a jig, lifting about 2.9 kg vertically and confirming ejection via a DMSG sensor on the magnet-equipped rod.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU the Right Cylinder?
When sizing this 60 mm stroke unit, consider the neighbouring bores: the smaller Ø10 generates 39.3 N of push at 0.5 MPa, while the larger Ø16 provides 100.5 N. If your application loses air or the valve is centred, the piston will drift, as the TPU bumpers only decelerate the stroke end rather than locking the load. To hold a position securely, integrate an external rod lock or a pilot-operated check valve. The built-in magnet pairs directly with CMSG, DMSG or EMSG sensors, and the U-style rear cover offers flexible 90-degree mounting. For a 60 mm stroke, side-load risks are minimal, but always ensure the rod end aligns with the load to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU FAQ
At 0.5 MPa it pushes 56.5 N and pulls 42.4 N. At 0.7 MPa it pushes 79.1 N and pulls 59.4 N. The theoretical maximum force is 11.5 kgf at 1.0 MPa. The air port is M5x0.8.
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You must use an external rod lock or pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.