Airtac PB Pen-type Cylinder PB10X115SR
The AirTAC Airtac PB Pen-type Cylinder PB10X115SR is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 115mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke115 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X115SR
The AirTAC PB10X115SR is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It features a slim SUS304 stainless steel barrel and piston rod, providing excellent durability in damp or mildly corrosive environments without adding unnecessary bulk to your jig. Delivering 39.3 N of push force at 0.5 MPa, it occupies a practical middle ground for light assembly tooling.
This specific configuration includes an R axial air inlet for in-line plumbing and a built-in piston magnet (-S) for position sensing. The bore dictates an M5x0.8 port and an M8x1.0 rod-end thread. Because it uses a fixed TPU bumper at each end rather than an adjustable air cushion, you should meter-out the exhaust or add an external shock absorber when cycling real tooling mass at higher speeds.
Airtac PB Pen-type Cylinder PB10X115SR Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X115SR |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X115SR
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X115SR Is Used
PCB Depaneling Jig
Actuates a light cutting blade on an electronics assembly line, where the slim stainless body resists flux fumes and fits within dense routing machinery.
Package Sorting Diverter
Pushes small parcels laterally on a logistics belt, utilizing the 115mm stroke and R axial inlet to keep pneumatic plumbing perfectly in-line with the conveyor frame.
Lab Sample Ejector
Ejects vials from a testing carousel, relying on the built-in magnet to trigger an electronic switch for precise position confirmation before the next cycle.
Is the Airtac PB Pen-type Cylinder PB10X115SR the Right Cylinder?
When sizing this actuator, plan for a safe working load of roughly 24 N at 0.5 MPa, which accounts for seal friction and smooth travel. For vertical lifts, this equates to hoisting about 2 kg with a sane 2:1 safety margin. If your application requires slightly less force, the Ø6 bore offers 14.2 N of push at 0.5 MPa; stepping up to the Ø12 bore yields 56.5 N for heavier tooling.
Keep in mind that a plain PB-type cylinder does not hold its load if air pressure is lost or the valve is centered—the piston will drift, and the bumper only decelerates near the stroke end. For fail-safe holding, an external stop or rod lock is required. To order, confirm the 10mm bore, 115mm stroke, M5x0.8 port, S magnet, and R axial inlet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X115SR FAQ
This double-acting single-rod cylinder generates 39.3 N push and 33 N pull at 0.5 MPa. At the maximum operating pressure of 0.7 MPa, it yields 55 N push and 46.2 N pull. It operates between 0.15-0.7 MPa at speeds of 50-800 mm/s.
The Ø4 mm rod is designed strictly for coaxial thrust. Over long strokes or with off-axis loads, you must add an external guide or linear bearing to prevent binding, as the thin rod cannot handle lateral forces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X115SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.