Airtac PB Pen-type Cylinder PB10X160CB
The AirTAC Airtac PB Pen-type Cylinder PB10X160CB is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 160mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X160CB
The AirTAC PB10X160CB is a double-acting JIS pen-size mini cylinder engineered for compact automation. It delivers 39.3 N of push and 33 N of pull at 0.5 MPa, utilizing a slim SUS304 stainless steel barrel and a 4 mm rod to fit tight jigs where space and payload matter. The CB double clevis back cover allows the body to pivot smoothly during operation.
Air enters via an M5x0.8 port, driving the piston at speeds from 50-800 mm/s. End-of-stroke deceleration relies on fixed TPU bumpers rather than adjustable air cushions. Because the 4 mm rod is slender and travels 160 mm, maintaining coaxial thrust is critical; avoid side loads or add an external linear guide to prevent binding.
Airtac PB Pen-type Cylinder PB10X160CB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X160CB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X160CB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X160CB Is Used
PCB Depaneling Saw
Pivots a 160 mm guide arm via the CB clevis to route singulated circuit boards through a cutting blade without consuming valuable machine footprint.
Flow-Wrap Film Tensioner
Maintains steady tension on packaging film rolls with a 24 N safe working load, using the fixed TPU bumpers to soften end-of-stroke impacts during high-speed indexing.
Lab Sample Divertor
Swings vial racks between testing stations in analytical equipment, where the SUS304 stainless body resists humid lab environments and the pen-size profile fits narrow housings.
Is the Airtac PB Pen-type Cylinder PB10X160CB the Right Cylinder?
This 10 mm bore generates 39.3 N push at 0.5 MPa, sitting between the lighter 6 mm bore (14.2 N push) and the stronger 16 mm bore (100.5 N push). For sizing, plan for a safe working load of roughly 24 N, which equates to lifting about 2 kg vertically with a sane 2:1 margin. Confirm your ordering essentials: 10 mm bore, 160 mm stroke, M5x0.8 ports, CB double clevis, and no magnet.
Note that a plain PB-type cylinder drifts when air pressure is lost or the valve is centered, as the bumpers only decelerate near stroke end rather than locking the load. If your application requires fail-safe position holding, integrate an external rod lock or mechanical stop.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X160CB FAQ
At 0.5 MPa, the push force is 39.3 N and the pull force is 33 N. At the maximum operating pressure of 0.7 MPa, the push is 55 N and the pull is 46.2 N. The operating pressure range is 0.15-0.7 MPa, with a proof pressure of 1.2 MPa, and the speed range is 50-800 mm/s.
No, the piston will drift if air is lost or the valve is centered, as the fixed TPU bumpers only decelerate the rod near the stroke ends rather than locking it. For vertical loads, you should add an external rod lock or mechanical stop to prevent dropping.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X160CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.