Airtac PB Pen-type Cylinder PB10X180SR
The AirTAC Airtac PB Pen-type Cylinder PB10X180SR is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 180mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke180 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X180SR
The AirTAC PB10X180SR is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It features a slim SUS304 stainless steel barrel and a 4mm piston rod, yielding a theoretical push force of 39.3 N and a pull of 33 N at 0.5 MPa. The integrated magnet enables position detection using AirTAC reed or electronic switches, while the R axial inlet keeps plumbing perfectly in line with the body.
Operating at speeds from 50-800 mm/s, this 10mm bore unit relies on a fixed TPU bumper at each end to decelerate the piston near stroke limits. Because the 180mm stroke is quite long relative to the slender 4mm rod, maintaining coaxial thrust is critical; avoid side loads or add an external linear guide to prevent rod deflection.
Airtac PB Pen-type Cylinder PB10X180SR Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X180SR |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X180SR
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X180SR Is Used
PCB Probe Testing
Drives delicate test probes across electronic boards with a safe 24N working load, ensuring contacts are made without damaging the substrate.
Package Divert Flap
Actuates a lightweight routing flap on a sorting line, using the axial R inlet to keep pneumatic hoses tucked flat against the machine frame.
Lab Sample Dispenser
Moves a pipette head vertically to lift approximately 2 kg of fluid and labware, relying on the SUS304 barrel for damp environment durability.
Is the Airtac PB Pen-type Cylinder PB10X180SR the Right Cylinder?
When sizing this model, consider stepping down to the Ø6 bore (14.2 N push @0.5 MPa) for lighter tooling, or up to the Ø12 bore (56.5 N push @0.5 MPa) if you need more thrust. For the PB10X180SR specifically, plan for a safe working load of about 24 N (roughly 60% of the 0.5 MPa theoretical force) to account for seal friction, or expect to vertically lift around 2 kg with a sane 2:1 safety margin.
Remember that a standard pen cylinder drifts when air pressure is lost or the valve is centered, as the bumpers only decelerate near the end of travel and do not act as a lock. To configure this model correctly, confirm your requirements for the 10mm bore, 180mm stroke, M5x0.8 port, S magnet, R axial inlet, and any mounting brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X180SR FAQ
This 10mm bore cylinder provides a push of 39.3 N and a pull of 33 N at 0.5 MPa. At the maximum operating pressure of 0.7 MPa, the push is 55 N and the pull is 46.2 N. It operates at 0.15-0.7 MPa with speeds of 50-800 mm/s.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumpers only decelerate the rod near the end of its 180mm stroke; they do not function as a locking brake. An external rod lock or mechanical stop is required for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X180SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.