Airtac PB Pen-type Cylinder PB10X60U
The AirTAC Airtac PB Pen-type Cylinder PB10X60U is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 60mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X60U
The AirTAC PB10X60U is a JIS pen-size double-acting single-rod mini cylinder engineered for compact, high-frequency motion. It provides a theoretical push of 39.3 N and pull of 33 N at 0.5 MPa, driven through an M5x0.8 port. The slim SUS304 stainless steel barrel and piston rod resist damp or mildly corrosive environments, making it ideal for tight jigs and light end-of-arm tooling where space and payload are critical.
This 10mm bore variant features a 60mm stroke and a U-type back cover, offering a 90-degree side air inlet for flat plumbing along a machine frame. It relies on a fixed TPU bumper at each end to decelerate the piston over the final few millimeters. Because the rod is a slender Ø4 mm with an M8x1.0 end thread, you should maintain coaxial thrust and avoid side loading to prevent guide wear.
Airtac PB Pen-type Cylinder PB10X60U Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X60U |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X60U
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X60U Is Used
PCB Depaneling Router
Actuates a small cutting head or clamping finger in a compact electronics routing station, utilizing the 39.3 N push force to secure boards during the split operation.
Blister Pack Sealing
Drives a low-profile heat seal head in tight packaging machinery, where the 90-degree U inlet keeps plumbing flat against the machine frame to save vertical space.
Lab Dispense Valve
Opens and closes a precision fluid dispense valve on an analytical instrument, relying on the SUS304 stainless body to withstand mildly humid laboratory environments.
Is the Airtac PB Pen-type Cylinder PB10X60U the Right Cylinder?
When sizing this actuator, plan for a safe working load of about 24 N—roughly 60% of the 39.3 N push force at 0.5 MPa—to account for seal friction and smooth travel. In vertical lift scenarios, this equates to lifting about 2 kg with a sane 2:1 safety margin. If you need less force, stepping down to the Ø6 bore yields 14.2 N push at 0.5 MPa; if your jig requires more thrust, stepping up to the Ø12 bore provides 56.5 N.
Remember that a plain PB cylinder drifts when air is lost or the valve is centered, as the bumper only decelerates near stroke end rather than locking the load. For fail-safe holding, specify an external stop or rod lock. To order, confirm the 10mm bore, 60mm stroke, M5x0.8 port, U-type 90-degree inlet, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X60U FAQ
At 0.5 MPa, the push force is 39.3 N and the pull force is 33 N. At the maximum operating pressure of 0.7 MPa, the push is 55 N and the pull is 46.2 N. The operating pressure range is 0.15-0.7 MPa, with a speed of 50-800 mm/s.
The U back cover provides a 90-degree side air inlet for flat plumbing in confined spaces. The cylinder uses a fixed TPU bumper at each end to decelerate the piston over the last few millimeters; it is not adjustable, so at high speeds with real tooling mass you should meter-out the exhaust or add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X60U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.