Airtac PB Pen-type Cylinder PB10X65SU
The AirTAC Airtac PB Pen-type Cylinder PB10X65SU is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 65mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke65 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X65SU
The AirTAC PB10X65SU is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It utilizes a slim SUS304 stainless steel round barrel and piston rod, offering excellent durability in damp or mildly corrosive workspaces. At 0.5 MPa, this 10mm bore generates 39.3 N of push force and 33 N of pull force, peaking at 55 N push under the 0.7 MPa maximum operating pressure. The U option designates a 90-degree perpendicular side air inlet for flat plumbing, while the S code adds a piston magnet for position sensing.
Air enters via an M5x0.8 port, driving the 4mm rod at speeds of 50-800 mm/s. Deceleration relies on a fixed TPU bumper at each end, which absorbs impact over the final few millimeters rather than providing adjustable cushioning. Because the rod is only 4mm thick, it is built for coaxial thrust and requires an external guide if subjected to off-axis loads over its 65mm stroke.
Airtac PB Pen-type Cylinder PB10X65SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X65SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X65SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X65SU Is Used
PCB Depaneling Router
Extends a routing tool guide along a 65mm path to separate printed circuit boards, utilizing the slim 10mm body to fit between closely spaced fixture rails.
Blister Pack Sealing
Cycles a small heat platen for 39.3 N of clamping force at 0.5 MPa, with the U side inlet keeping pneumatic tubing flush against the machine frame.
Lab Dispense Valve
Actuates a precision fluid nozzle for reagent dosing, relying on the S magnet to trigger an electronic switch at the exact end of stroke.
Is the Airtac PB Pen-type Cylinder PB10X65SU the Right Cylinder?
When sizing this actuator, stepping down to the 6mm bore yields 14.2 N of push at 0.5 MPa, whereas stepping up to the 12mm bore provides 56.5 N, letting you match the exact force envelope. For the PB10X65SU specifically, plan for a safe working load of roughly 24 N (about 60 percent of the 0.5 MPa theoretical force) to account for seal friction. Alternatively, it lifts approximately 2 kg vertically with a sane 2:1 safety margin. Confirm your ordering essentials: 10mm bore, 65mm stroke, M5x0.8 port, S magnet, and U 90-degree side inlet. Note that this cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; install an external rod lock for fail-safe positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X65SU FAQ
This double-acting cylinder delivers 39.3 N push and 33 N pull at 0.5 MPa, and 55 N push and 46.2 N pull at the 0.7 MPa maximum operating pressure. It operates at speeds between 50-800 mm/s, uses an M5x0.8 port, and features a 4mm rod with an M8x1.0 rod-end thread.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper only decelerates the rod near the stroke end and does not act as a lock. For vertical loads or fail-safe holding, you must add an external stop or rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X65SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.