Airtac PB Pen-type Cylinder PB16X10CB
The AirTAC Airtac PB Pen-type Cylinder PB16X10CB is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 10mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB16X10CB
The AirTAC PB16X10CB is a JIS pen-size double-acting mini cylinder engineered for short, rapid linear motion. It features a 16 mm bore and a 10 mm stroke, generating 100.5 N of push force and 90.7 N of pull force at 0.5 MPa. The slim SUS304 stainless steel barrel and piston rod provide excellent durability in damp or mildly corrosive environments, keeping overall mass low for end-of-arm tooling.
This specific configuration includes a CB double clevis back cover, allowing the body to pivot smoothly on a pin to accommodate lateral misalignment. Air connections are made via M5x0.8 ports, and the rod end utilizes an M10x1.0 thread for secure load coupling. Deceleration at stroke ends is handled by a fixed TPU bumper rather than an adjustable air cushion.
Airtac PB Pen-type Cylinder PB16X10CB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X10CB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X10CB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X10CB Is Used
Short-Stroke Clamping
Ideal for locking small electronic housings or PCBs in pick-and-place machinery where a brief 10 mm travel and 100.5 N thrust securely hold the part for processing.
Pivot Actuated Flap
The CB double clevis allows the cylinder to swing on its mounting pin, making it perfect for pushing lightweight cardboard deflector flaps on high-speed packaging lines.
Ejector Station
Provides a fast 50-800 mm/s ejection stroke to kick small molded plastic parts out of a machining fixture, with the fixed TPU bumper absorbing the impact at the end of the 10 mm move.
Is the Airtac PB Pen-type Cylinder PB16X10CB the Right Cylinder?
Choosing this 16 mm bore model gives you the highest thrust in the PB family. If your application requires less force, stepping down to the 12 mm bore yields 56.5 N of push at 0.5 MPa, whereas this 16 mm unit provides 100.5 N. Keep in mind that a plain double-acting cylinder does not hold its position if air pressure drops or the valve is centered; the piston will drift, so an external rod lock is necessary for fail-safe holding.
For sizing your payload, plan for a safe working load of about 60 N (roughly 60% of the 0.5 MPa theoretical push) to account for seal friction. This equates to lifting around 5.1 kg vertically with a sane 2:1 safety margin. When ordering, confirm the 10 mm stroke, the CB clevis mount, the M5x0.8 port, and whether you need the optional -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X10CB FAQ
At 0.5 MPa, the push force is 100.5 N and the pull force is 90.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 140.7 N and the pull force is 126.9 N. The operating pressure range is 0.15-0.7 MPa, with a speed range of 50-800 mm/s.
No, the piston will drift if air is lost or the directional valve is centered. The fixed TPU bumper only decelerates the piston near the end of the stroke; it does not act as a lock. For vertical loads, you must add an external rod lock or mechanical stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X10CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.