Airtac PB Pen-type Cylinder PB16X15SUFA
The AirTAC Airtac PB Pen-type Cylinder PB16X15SUFA is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 15mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB16X15SUFA
The AirTAC PB16X15SUFA is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency motion. It features a slim SUS304 stainless steel round barrel and piston rod, offering excellent durability in damp or mildly corrosive environments while keeping end-of-arm tooling weight to an absolute minimum. Delivering 100.5 N of push force at 0.5 MPa, this 16 mm bore unit is paired with a short 15 mm stroke for rapid, tight-range actuation.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches, a 90-degree U-type side air inlet for flat plumbing, and an FA mounting bracket. The M5x0.8 port and M10x1.0 rod-end thread are fixed by the bore size. It relies on a fixed TPU bumper at each end to decelerate the stroke, meaning you should meter-out the exhaust or add an external shock absorber if cycling heavy tooling rapidly.
Airtac PB Pen-type Cylinder PB16X15SUFA Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X15SUFA |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X15SUFA
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X15SUFA Is Used
PCB Depaneling Jig
Provides a short 15 mm clamping thrust to hold circuit boards steady during routing, utilizing the FA bracket to bolt directly onto the routing station frame.
Blister Pack Sealing
Cycles rapidly to press lid films against blister cavities, where the SUS304 body withstands washdown environments and the U inlet keeps plumbing flat against the machine wall.
Small Part Diverter
Pushes lightweight plastic caps on a packaging line, using the built-in magnet to confirm the 15 mm extension before retracting at speeds up to 800 mm/s.
Is the Airtac PB Pen-type Cylinder PB16X15SUFA the Right Cylinder?
Choosing this 16 mm bore gives you the highest thrust in the PB family, pushing 100.5 N at 0.5 MPa. If you need slightly less force, stepping down to the 12 mm bore yields 56.5 N of push. Because 16 mm is the largest available diameter in this series, there is no larger standard option; for heavier loads, a different cylinder family would be required. Plan for a safe working load of about 60 N, which accounts for roughly 60% of the theoretical 0.5 MPa figure to overcome seal friction and ensure smooth travel.
When ordering, confirm the 15 mm stroke, M5x0.8 porting, and your specific options: the -S magnet, U side inlet, and FA bracket. Note that a plain PB cylinder does not hold its position if air pressure is lost or the valve is centered; the piston will drift, and the bumper only decelerates near the end of travel. For fail-safe holding, an external rod lock or mechanical stop is required. Additionally, the Ø5 mm rod is designed for coaxial thrust, so avoid side loads that could bend the slender rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X15SUFA FAQ
At 0.5 MPa, the push force is 100.5 N and the pull force is 90.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 140.7 N and the pull force is 126.9 N. The operating pressure range is 0.15-0.7 MPa, with a speed range of 50-800 mm/s.
This cylinder uses a fixed TPU bumper at each end to absorb impact, which is not field-adjustable; for high-speed or heavy loads, add external shock absorption. The -S option includes a piston magnet compatible with AirTAC reed or electronic switches for precise position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X15SUFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.