Airtac PB Pen-type Cylinder PB16X60SCB
The AirTAC Airtac PB Pen-type Cylinder PB16X60SCB is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 60mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
About the Airtac PB Pen-type Cylinder PB16X60SCB
The AirTAC PB16X60SCB is a JIS double-acting single-rod pen-size mini cylinder engineered for compact, high-frequency actuation. It features a slim SUS304 stainless barrel and piston rod, offering excellent durability in damp or mildly corrosive environments while keeping weight low for end-of-arm tooling. Delivering 100.5 N of push force at 0.5 MPa, it provides robust performance within tight jig spaces.
This specific configuration includes a built-in piston magnet for position sensing alongside a CB double clevis back cover for pivoting loads. Air connects via an M5x0.8 port, and the Ø5 mm rod terminates in an M10x1.0 thread. Deceleration relies on a fixed TPU bumper at each end, which absorbs impact over the final few millimeters of travel rather than providing adjustable cushioning.
Airtac PB Pen-type Cylinder PB16X60SCB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X60SCB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X60SCB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X60SCB Is Used
PCB Depaneling Jig
Actuates a routing blade fixture in tight electronics assembly cells, using the 60 mm stroke to separate printed circuit boards with precise coaxial thrust.
Pouch Sealing Clamp
Drives a pivoting sealing jaw via the CB double clevis on a vertical form-fill machine, cycling rapidly to crimp flexible packaging films.
Sorter Diverter Arm
Pushes lightweight cartons off a logistics belt, leveraging the stainless build to withstand washdown cycles in food distribution lines.
Is the Airtac PB Pen-type Cylinder PB16X60SCB the Right Cylinder?
Selecting this 16 mm bore yields 100.5 N push at 0.5 MPa, sitting at the top of the PB family range. If your task requires less force, stepping down to the 12 mm bore provides 56.5 N push, making this model the correct choice only when you need the maximum available thrust in the series. Plan for a safe working load of roughly 60 N, which accounts for seal friction at standard 0.5 MPa operation.
When sizing vertical lifts, expect to handle about 5.1 kg safely using a 2:1 margin. Remember that a standard PB cylinder drifts when air pressure is lost or the valve is centered, as the bumpers only decelerate near stroke end rather than locking the rod. To finalize your order, confirm the 60 mm stroke, M5x0.8 port, S magnet, and CB double clevis mount.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X60SCB FAQ
At 0.5 MPa, the push force is 100.5 N and the pull force is 90.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 140.7 N and the pull force is 126.9 N. The cylinder operates between 0.15-0.7 MPa, runs at speeds of 50-800 mm/s, and has a proof pressure of 1.2 MPa.
The CB back cover provides a double clevis joint for pivoting loads. At stroke endpoints, fixed TPU bumpers absorb impact over the final few millimeters but are not adjustable. For high-speed tooling mass, meter-out the exhaust or add an external shock absorber. The cylinder does not hold position on air loss, so an external rod lock is required for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X60SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.