Airtac PB Pen-type Cylinder PB16X60SR
The AirTAC Airtac PB Pen-type Cylinder PB16X60SR is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 60mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
About the Airtac PB Pen-type Cylinder PB16X60SR
The AirTAC PB16X60SR is a JIS pen-size double-acting single-rod mini cylinder engineered for compact, high-frequency motion. It delivers a robust 100.5 N push and 90.7 N pull at 0.5 MPa, peaking at 140.7 N extend force when supplied at the 0.7 MPa maximum. The slim SUS304 stainless barrel and piston rod provide dependable resistance in damp or mildly corrosive work areas while keeping end-of-arm tooling extremely light.
This specific configuration includes an R axial air inlet for clean in-line plumbing and a built-in piston magnet (the S option) for position feedback. Air connections use an M5x0.8 port, and the rod end features an M10x1.0 thread for secure load coupling. Deceleration relies on a fixed TPU bumper at each end rather than an adjustable air cushion, meaning it only absorbs impact over the final few millimeters of travel.
Airtac PB Pen-type Cylinder PB16X60SR Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X60SR |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X60SR
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X60SR Is Used
PCB Depaneling Router
Drives a light cutting head along a 60 mm path to singulate printed circuit boards, utilizing the stainless body to resist flux residue and cooling mist.
Blister Pack Sealing
Cycles a heated platen rapidly to press and seal medical blister packs, where the fixed TPU bumpers absorb the repeated end-of-stroke impact.
Lab Tube Elevation
Raises a small carrier of sample vials precisely 60 mm within an analytical instrument, using the S magnet to trigger a reed or electronic switch at the top position.
Is the Airtac PB Pen-type Cylinder PB16X60SR the Right Cylinder?
When sizing this actuator, note that the Ø16 bore sits at the top of the PB family range. If you need a smaller footprint, stepping down to the Ø12 bore reduces the 0.5 MPa push force to 56.5 N. Staying with the Ø16 is ideal when you need maximum thrust within the pen-size envelope. For practical sizing, plan for a safe working load of about 60 N (roughly 60 percent of the 100.5 N theoretical force at 0.5 MPa) to account for seal friction and smooth travel. This equates to lifting a part weighing about 5.1 kg vertically with a sensible 2:1 safety margin.
Because the slender Ø5 mm rod is designed strictly for coaxial thrust, avoid side-loading and add an external linear guide if your payload risks off-axis moments. Remember that a standard double-acting cylinder drifts when air pressure is removed or the valve is centered; the fixed bumper only decelerates the stroke end and will not lock the load, so fit an external rod lock for fail-safe holding. To order, confirm the 16 mm bore, 60 mm stroke, M5x0.8 port, S magnet, and R axial inlet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X60SR FAQ
This double-acting cylinder provides 100.5 N push and 90.7 N pull at 0.5 MPa, reaching maximums of 140.7 N push and 126.9 N pull at the 0.7 MPa operating pressure limit. It supports speeds from 50-800 mm/s, uses an M5x0.8 port, and has a standard 60 mm stroke within the 300 mm maximum for this bore.
The R code specifies an axial air inlet for straightforward in-line plumbing along the cylinder axis. The S code indicates a built-in piston magnet, allowing you to mount AirTAC reed or electronic switches along the body for precise position detection without altering the slim pen-size profile.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X60SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.