Airtac PB Pen-type Cylinder PB16X60SRLB
The AirTAC Airtac PB Pen-type Cylinder PB16X60SRLB is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 60mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
About the Airtac PB Pen-type Cylinder PB16X60SRLB
The AirTAC PB16X60SRLB is a JIS double-acting single-rod mini cylinder engineered for compact automation. It generates 100.5 N of push and 90.7 N of pull at 0.5 MPa, utilizing a slim SUS304 stainless steel round body and a 5 mm rod with an M10x1.0 end thread. The integrated -S magnet allows position detection via AirTAC reed or electronic switches.
This configuration features an R axial air inlet for in-line plumbing and an LB mounting bracket for secure attachment. It operates at speeds from 50-800 mm/s with a maximum pressure of 0.7 MPa. End-of-stroke deceleration is handled by fixed TPU bumpers, which are not adjustable, so high-speed cycles with heavy tooling require external shock absorption or metered exhaust.
Airtac PB Pen-type Cylinder PB16X60SRLB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X60SRLB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X60SRLB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X60SRLB Is Used
PCB Depaneling Router
Actuates a cutting head guide on an electronics depaneling machine, using the 100.5 N thrust to maintain steady coaxial pressure during board separation.
Carton Flap Folder
Tucks minor flaps on a small carton erector where space is tight, relying on the LB bracket for rigid mounting and the R inlet for straight-line tubing.
Lightweight Vertical Lift
Raises 5 kg electronic component trays between conveyor tiers, benefiting from the 2:1 safety margin derived from its 0.5 MPa rating.
Is the Airtac PB Pen-type Cylinder PB16X60SRLB the Right Cylinder?
Selecting this 16 mm bore provides the highest thrust in the PB family, delivering 100.5 N push at 0.5 MPa. If you need less force, stepping down to the 12 mm bore yields 56.5 N. Plan for a safe working load of roughly 60 N (about 60% of the 0.5 MPa rating) to account for seal friction, which equates to lifting approximately 5.1 kg vertically with a 2:1 safety margin. Keep the thin 5 mm rod coaxial to avoid side-loading.
When ordering, confirm the 16 mm bore, 60 mm stroke, M5x0.8 port, -S magnet, R axial inlet, and LB bracket. Note that a standard PB cylinder drifts when air pressure is lost or the valve is centered, as the bumpers only decelerate near stroke end rather than locking the load. An external rod lock is necessary for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X60SRLB FAQ
At 0.5 MPa it provides 100.5 N push and 90.7 N pull. At the maximum 0.7 MPa operating pressure, it yields 140.7 N push and 126.9 N pull. The operating pressure range is 0.15-0.7 MPa, with a proof pressure of 1.2 MPa and a speed range of 50-800 mm/s.
It uses fixed TPU bumpers at both ends that decelerate the piston over the last few millimeters; they are not adjustable, so high-mass cycles need external shock absorbers. The built-in -S magnet allows tracking by AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X60SRLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.