Airtac PB Pen-type Cylinder PB6X60SR
The AirTAC Airtac PB Pen-type Cylinder PB6X60SR is a double-acting pen-size (mini) air cylinder with a Ø6mm bore and 60mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ6 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM5×0.8
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB6X60SR
The AirTAC PB6X60SR is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency motion. It generates 14.2 N of push and 10.6 N of pull at 0.5 MPa, utilizing a slim SUS304 stainless steel barrel and a 3 mm piston rod to endure mildly corrosive or damp environments. The integrated magnet (-S) enables position detection using AirTAC reed or electronic switches.
This 60 mm stroke unit features an R axial air inlet for in-line plumbing and an M5x0.8 port. It relies on a fixed TPU bumper at each end to decelerate the stroke. Because the rod is only 3 mm thick, you should maintain coaxial thrust and avoid side loading to prevent deflection over this extended travel distance.
Airtac PB Pen-type Cylinder PB6X60SR Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB6X60SR |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø6 mm |
| Rod diameter | Ø3 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 60 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø6mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 14.2 N | 10.6 N |
| 0.7 MPa (max) | 19.8 N | 14.8 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB6X60SR
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 6 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB6X60SR Is Used
PCB Component Placement
Drives a small vacuum pick-up head to deposit microchips onto circuit boards within tight assembly jigs where larger actuators cannot fit.
Lab Dispenser Actuation
Indexes a reagent syringe for precise fluid dispensing, benefiting from the stainless build in damp chemical processing areas.
Micro-Clamp Ejection
Pushes delicate electronic connectors out of a test fixture using a 60 mm travel, safely lifting parts weighing under 0.7 kg.
Is the Airtac PB Pen-type Cylinder PB6X60SR the Right Cylinder?
When sizing this 6 mm bore actuator, plan for a safe working load of about 9 N (roughly 60% of the 14.2 N theoretical push at 0.5 MPa) to account for seal friction. If your application requires less force, the 4 mm bore offers 6.3 N push at 0.5 MPa; stepping up to the 10 mm bore yields 39.3 N. This PB6X60SR configuration includes the S magnet, R axial inlet, and standard 60 mm stroke.
Note that a plain double-acting cylinder does not hold its position if air pressure drops or the valve is centered, as the piston will drift. For fail-safe load holding, you must incorporate an external stop or a dedicated rod lock. Confirm your ordering essentials: 6 mm bore, 60 mm stroke, M5x0.8 port, magnet, and R back cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB6X60SR FAQ
This double-acting cylinder delivers 14.2 N push and 10.6 N pull at 0.5 MPa. At the maximum operating pressure of 0.7 MPa, it provides 19.8 N push and 14.8 N pull. It operates between 0.15-0.7 MPa at speeds of 50-800 mm/s.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper only decelerates the piston near the stroke end and does not act as a brake. An external rod lock or mechanical stop is required for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB6X60SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.