Airtac SAI100 Standard Air Cylinder SAI100AX170S
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100AX170S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke170 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100AX170S
The AirTAC SAI100X170-S is a double-acting ISO 15552 profile cylinder offering a robust 3927 N push force at 0.5 MPa and 5497 N at 0.7 MPa. Its 170 mm stroke provides the exact mid-range travel needed for heavy material handling, clamping, and pressing tasks. The extruded aluminum barrel design omits traditional tie rods, ensuring a clean exterior while maintaining strict dimensional interchangeability with other ISO 15552 cylinders.
This specific configuration includes a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance in humid or mildly chemically exposed environments. It is equipped with a magnet (-S) to support CMSE and DMSE series sensors, fitting directly into the integrated grooves on both sides of the barrel. The PT tapered port threads ensure a tight, reliable pneumatic connection, and the standard adjustable air cushions at both ends manage deceleration smoothly.
Airtac SAI100 Standard Air Cylinder SAI100AX170S Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100AX170S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100AX170S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100AX170S Is Used
Heavy-Duty Stamping
Provides the necessary 5497 N push force at 0.7 MPa to actuate heavy stamping and forming presses securely.
Pallet Diverting
Drives robust diverters on high-mass conveyor lines where a 170 mm stroke reliably pushes loaded pallets.
Automated Guiding
Positions heavy structural components or pallets in automated storage systems using CMSE magnetic sensors.
Is the Airtac SAI100 Standard Air Cylinder SAI100AX170S the Right Cylinder?
This 100 mm bore is ideal when a 80 mm bore (2513 N push at 0.5 MPa) is insufficient for your load, but a massive 125 mm bore (6136 N push at 0.5 MPa) would be overkill and consume too much space. Because the 170 mm stroke is relatively short, rod bending and side-load issues are minimal, but always ensure the load is guided to prevent premature seal wear. If your machinery loses air pressure, this standard cylinder cannot hold a load; for drop prevention, specify the SAIL (pneumatic lock) or BSAI (bidirectional clamp-lock) variant. For a direct ISO 15552 replacement, match the 100 mm bore, 170 mm stroke, G1/2 port, and select a mounting accessory like the FA flange or TC trunnion along with a -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100AX170S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force increases to 5497 N.
Yes, it is a genuine ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders using the same 100 mm bore and G1/2 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100AX170S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.