Airtac SAI100 Standard Air Cylinder SAI100AX600
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100AX600 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100AX600
The AirTAC SAI100X600 is a double-acting ISO 15552 profile cylinder offering a 600mm stroke and 3927N of push force at 0.5MPa. Its extruded aluminum barrel omits tie-rods, providing a clean, standardized mounting interface that drops directly into existing ISO 15552 footprints.
This specific unit is configured with a SUS420J2 stainless steel piston rod (code A) for superior corrosion resistance and features tapered PT ports. Because it lacks a magnet, it cannot host reed sensors directly; if position feedback is required, an external -S variant or standalone switches are necessary.
Airtac SAI100 Standard Air Cylinder SAI100AX600 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100AX600 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100AX600
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100AX600 Is Used
Automotive Body Welding
Handles heavy clamping duties on welding fixtures, utilizing the SUS420J2 rod to resist weld spatter and shop grit.
Pallet Transfer Indexing
Pushes loaded pallets between conveyor zones, where the 600mm stroke provides the necessary reach for wide transfer stations.
Large Press Unloading
Extracts formed parts from large stamping presses, relying on the 3927N force to reliably strip and eject heavy materials.
Is the Airtac SAI100 Standard Air Cylinder SAI100AX600 the Right Cylinder?
Providing 3927N at 0.5MPa, this bore handles heavy loads, though stepping down to an 80mm bore reduces push force to 2513N for lighter tasks. At 600mm of travel, the unsupported rod is highly susceptible to bending under side loads; utilizing external guide rails or a fully guided cylinder is strongly recommended to prevent premature rod-bearing wear.
As an ISO 15552 standard cylinder, it matches the exact mounting dimensions of comparable profile cylinders for seamless interchangeability. Remember that the adjustable air cushions only decelerate the piston near stroke ends and do not hold loads; if pressure drops, the rod will drift, requiring a SAIL lock variant or external pilot-operated check valve for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100AX600 FAQ
At 0.5MPa operating pressure, the SAI100X600 generates 3927N of push force. If you increase the pressure to 0.7MPa, the push force rises to 5497N.
No, the standard SAI cylinder does not hold position without live air pressure. The adjustable cushions only slow the piston at stroke end. For dead-load holding, use the SAIL (air-released lock) or BSAI (clamp-lock) variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100AX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.