Airtac SAI100 Standard Air Cylinder SAI100BX110
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100BX110 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100BX110
The AirTAC SAI100X110 is a double-acting ISO 15552 profile cylinder offering a robust 3927 N push force at 0.5 MPa. Its 110 mm stroke is well-suited for medium-travel automation tasks requiring substantial thrust.
This specific configuration features a SUS304 stainless steel piston rod for superior corrosion resistance and PT tapered port threads. Note that standard sensors require an internal magnet; without it, the dual side sensor grooves on the extruded aluminum barrel remain ready for CMSE or DMSE switches if upgraded later.
Airtac SAI100 Standard Air Cylinder SAI100BX110 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100BX110 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100BX110
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100BX110 Is Used
Automotive Stamping
Provides the high 3927 N force needed to form and stamp light automotive body panels.
Pallet Diversion
Executes 110 mm strokes to push heavy pallets onto secondary packaging lines.
Plastic Injection Clamping
Holds molds securely closed during low-pressure plastic injection molding cycles.
Is the Airtac SAI100 Standard Air Cylinder SAI100BX110 the Right Cylinder?
Providing 3927 N at 0.5 MPa, stepping down to an 80 mm bore drops output to 2513 N, while moving up to 125 mm increases it to 6136 N. Because this 110 mm stroke is under 300 mm, side-load stress on the rod bearing is minimal compared to longer units.
This model uses a G1/2 port and M20x1.5 rod thread. As a standard double-acting cylinder, it cannot hold a load if air pressure is lost; for position holding, select the SAIL or BSAI variant. It serves as a direct dimensional drop-in replacement for any ISO 15552 profile cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100BX110 FAQ
At 0.5 MPa, the SAI100X110 generates a push force of 3927 N and a pull force of 3681 N.
Yes, the SAI100X110 is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing direct drop-in replacement using standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100BX110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.