Airtac SAI100 Standard Air Cylinder SAI100BX130
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100BX130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke130 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100BX130
The AirTAC SAI100X130 is a double-acting ISO 15552 profile cylinder engineered to deliver 3927 N of push force at 0.5 MPa, scaling up to 5497 N at 0.7 MPa. This 100 mm bore and 130 mm stroke configuration is tailored for heavy-duty industrial handling where substantial thrust and moderate travel are required.
Built with a SUS304 stainless steel rod for superior corrosion resistance, this model features a PT tapered port thread and an extruded aluminum barrel with sensor grooves on both sides. It serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 profile cylinders.
Airtac SAI100 Standard Air Cylinder SAI100BX130 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100BX130 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100BX130
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100BX130 Is Used
Press Ejection
Provides the robust 5497 N output at 0.7 MPa needed to reliably knock heavy stamped parts out of progressive dies.
Heavy Material Grippers
Actuates large mechanical clamps gripping heavy steel plates or cast components during robotic transfer.
Pallet Stops
Functions as a high-force pop-up stopper on heavy-duty roller conveyors handling loaded pallets.
Is the Airtac SAI100 Standard Air Cylinder SAI100BX130 the Right Cylinder?
If 3927 N at 0.5 MPa is excessive for your payload, stepping down to the 80 mm bore yields 2513 N, creating a lighter, faster cycle. Because this is a standard double-acting cylinder, it relies on live air pressure to move; if pneumatic supply drops, the piston will drift. For dead-end holding without air, integrate an external pilot-operated check valve or specify the SAIL locking variant. To mount this ISO 15552 unit, use FA/FB flanges or TC trunnion brackets, and note that a magnet (-S) is not included for sensor detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100BX130 FAQ
It generates 3927 N of push force at 0.5 MPa, 5497 N at 0.7 MPa, and reaches 7068 N at 0.9 MPa.
Yes, the SAI100X130 is dimensionally interchangeable per ISO 15552 profile standards, allowing it to drop into existing mounting footprints using standard FA, FB, or TC hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100BX130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.