Airtac SGC Standard Cylinder SGC125X300FA
The AirTAC Airtac SGC Standard Cylinder SGC125X300FA is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 300mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke300 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X300FA
Delivering 6136 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built on a genuine ISO 15552 tie-rod framework. Four steel tie rods clamp the aluminum barrel to the front and rear covers, ensuring high structural rigidity while the two-way piston seal maintains an internal oil reservoir for long service life. Because it adheres to the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures and shares standard accessory dimensions.
This specific FA flange-mounted configuration uses a 125 mm bore, a 300 mm stroke, and a G1/2 air port. Plan for about 3682 N of real work at 0.5 MPa, which equates to lifting roughly 313 kg vertically with a 2:1 safety margin. Note that this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches without upgrading to the magnet-equipped variant.
Airtac SGC Standard Cylinder SGC125X300FA Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X300FA |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X300FA
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X300FA Is Used
Press Ejection Systems
Provides the 6136 N push force needed to eject formed metal parts from heavy stamping presses, utilizing the FA flange for rigid front-plate mounting.
Pallet Stopper Gates
Acts as a robust 300 mm stroke diversion gate on high-speed packaging lines, physically halting pallets weighing up to 313 kg with a safe 2:1 margin.
Plastic Mold Opening
Generates reliable separation force for large injection mold halves, leveraging the tie-rod construction to withstand repetitive high-impact cycles.
Is the Airtac SGC Standard Cylinder SGC125X300FA the Right Cylinder?
When sizing this 125 mm bore unit, verify your actual load requirements against its 6136 N push capacity at 0.5 MPa. If your application demands less force, dropping down is not an option within the SGC family as this is the smallest available bore; stepping up to the 160 mm bore yields 10053 N of push force at the same pressure. The integrated FA flange makes front mounting straightforward, but remember that a standard cylinder drifts when air is removed or the valve is centered. The adjustable air cushions only decelerate the piston near the stroke ends and do not function as a locking brake, so incorporate an external rod lock or pilot-operated check valve if you need to hold a suspended load. Additionally, with a 300 mm stroke, ensure your guiding mechanism prevents side-load rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X300FA FAQ
This 125 mm bore cylinder features a G1/2 air port and generates 6136 N push / 5734 N pull at 0.5 MPa, and 8590 N push / 8028 N pull at 0.7 MPa. Its theoretical maximum force is 1251 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, meaning it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant (e.g., SGC125X300FA-S) if your application requires electronic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X300FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.