Airtac SGC Standard Cylinder SGC125X600FTC
The AirTAC Airtac SGC Standard Cylinder SGC125X600FTC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X600FTC
Delivering 6136 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 3682 N of real work at 0.5 MPa, which safely lifts roughly 313 kg vertically with a 2:1 margin.
This 125 mm bore model features a 600 mm stroke, a 32 mm rod with an M27x2.0 thread, and a G1/2 air port. It operates at 30-500 mm/s with adjustable 40 mm air cushions at both ends. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac SGC Standard Cylinder SGC125X600FTC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X600FTC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X600FTC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X600FTC Is Used
Pallet Transfer Diversion
Pushes heavy loaded pallets onto secondary conveyor lines using its 6136 N thrust and 600 mm reach, relying on the FTC trunnion mount to accommodate pivoting alignment.
Automated Warehouse Pusher
Acts as a heavy-duty diverter in high-throughput logistics, moving large cartons with a safe working load of roughly 3682 N at 0.5 MPa without overstressing the assembly.
Injection Mold Ejection
Provides the extended 600 mm stroke required to clear large molded parts from press machinery, utilizing the adjustable 40 mm air cushions to soften end-of-stroke impact.
Is the Airtac SGC Standard Cylinder SGC125X600FTC the Right Cylinder?
When sizing this 600 mm stroke unit, consider the adjacent bores: the larger 160 mm bore provides 10053 N of push at 0.5 MPa for heavier loads, while there is no smaller SGC bore below 125 mm. The integrated FTC trunnion mount simplifies pivoting installations per the ISO 15552 mounting interface.
Because the 600 mm stroke is substantial, provide external guide support to prevent rod bending and side-load damage. Note that a plain cylinder drifts when air is lost or the valve is centered; the air cushion only decelerates the piston near the end of travel and does not act as a lock. Use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X600FTC FAQ
This 125 mm bore cylinder features a G1/2 air port and an M27x2.0 rod thread. It delivers 6136 N push and 5734 N pull at 0.5 MPa, 8590 N push and 8028 N pull at 0.7 MPa, with a theoretical maximum force of 1251 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for sensing. The FTC trunnion mount utilizes the standard ISO 15552 mounting interface for easy fixture integration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X600FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.