Airtac SGC Standard Cylinder SGC125X600TC
The AirTAC Airtac SGC Standard Cylinder SGC125X600TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X600TC
Delivering 6136 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles large-bore automation tasks with ease. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for extended operational life. Plan for about 3682 N of real work at 0.5 MPa, which safely lifts roughly 313 kg vertically with a 2:1 margin.
This specific configuration features a 600 mm stroke and a TC trunnion mounting interface. It uses a G1/2 air port and an M27x2.0 piston rod thread. Because this SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG magnetic switches; position sensing requires external methods.
Airtac SGC Standard Cylinder SGC125X600TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X600TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X600TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X600TC Is Used
Pallet Diversion Gate
Actuates heavy-duty lane dividers on packaging lines, using the 600 mm stroke to shift pallets smoothly between parallel conveyor routes.
Vertical Material Lift
Raises tiered storage platforms in automated retrieval systems, safely lifting components up to the 313 kg vertical capacity threshold.
Press Ejection Arm
Extends to clear stamped metal parts from hydraulic presses, relying on the rigid tie-rod build to absorb repetitive impact loads.
Is the Airtac SGC Standard Cylinder SGC125X600TC the Right Cylinder?
As the smallest bore in the SGC family, the 125 mm offers 6136 N push at 0.5 MPa, while stepping up to the 160 mm bore provides 10053 N if your application demands greater thrust. The TC trunnion mount suits pivoting articulations, but remember that a plain cylinder drifts when air is lost or the valve is centred; the air cushion only decelerates the piston near stroke end, so install an external rod lock or pilot-operated check valve for secure load holding.
With a 600 mm stroke, the Ø32 mm rod needs external guidance to prevent side-load bending and premature seal wear. The default TPU seal handles temperatures from -20 to +70 C, though a Viton H option extends this range up to 150 C for high-heat environments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X600TC FAQ
The 125 mm bore yields a push force of 6136 N and a pull force of 5734 N at 0.5 MPa. At 0.7 MPa, push is 8590 N and pull is 8028 N. The theoretical maximum force is 1251 kgf at 1.0 MPa. It uses a G1/2 air port and features a 40 mm adjustable air cushion at both ends.
No, this specific SKU does not include the -S magnet, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for internal position sensing. The cylinder is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X600TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.