Airtac SGC Standard Cylinder SGC125X700TC
The AirTAC Airtac SGC Standard Cylinder SGC125X700TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X700TC
Delivering 6136 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is engineered for heavy-duty automation. The 125 mm bore uses a G1/2 air port and a 32 mm hard-chrome rod, while four steel tie rods clamp the aluminum barrel to the covers for maximum structural rigidity under high thrust.
Because it lacks the -S suffix, this specific SKU cannot host CMSG, DMSG, or EMSG magnetic switches. For practical sizing, plan for about 3682 N of real work at 0.5 MPa, which equates to lifting roughly 313 kg vertically with a 2:1 safety margin. The two-way piston seal retains an internal oil reservoir to ensure long component life.
Airtac SGC Standard Cylinder SGC125X700TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X700TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X700TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X700TC Is Used
Pallet Transfer Diversion
Pushes heavy wood or steel pallets across a 700 mm gap using 6136 N of 0.5 MPa thrust, relying on the TC trunnion to handle pivot stresses during the stroke.
Automated Warehousing Gate
Acts as a 700 mm extending barrier or diverter arm in high-throughput logistics, utilizing the 125 mm bore's robust tie-rod construction to absorb repeated impacts.
Injection Mold Ejection
Drives a 313 kg mold ejection plate vertically with a 2:1 safety margin, taking advantage of the 40 mm adjustable air cushions to soften end-of-stroke deceleration.
Is the Airtac SGC Standard Cylinder SGC125X700TC the Right Cylinder?
When sizing this 700 mm stroke unit, verify if the adjacent bores fit your circuit better: the smaller SGC series drops below 125 mm, while the larger 160 mm bore provides 10053 N of push at 0.5 MPa. The included TC trunnion mount aligns with the standardized ISO 15552 mounting interface, dropping easily into existing large-bore fixtures.
Because this model lacks the -S magnet, position sensing is unavailable without changing the SKU. Furthermore, a 700 mm extension demands external guide rails to prevent rod bending under side loads. Note that a standard cylinder drifts when air is lost; the air cushions only decelerate the piston near stroke end, so add an external rod lock for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X700TC FAQ
This 125 mm bore cylinder features a G1/2 air port and delivers 6136 N push / 5734 N pull at 0.5 MPa, 8590 N push / 8028 N pull at 0.7 MPa, with a theoretical maximum of 1251 kgf at 1.0 MPa. It operates at speeds between 30-500 mm/s.
No, this specific SKU does not include the -S magnet option, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches. You would need to select the -S variant for position sensing, though it still offers full ISO 15552 mounting interface compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X700TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.