Airtac SGC Standard Cylinder SGC125X70TC
The AirTAC Airtac SGC Standard Cylinder SGC125X70TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 70mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke70 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X70TC
Delivering 6136 N of push force at 0.5 MPa, this double-acting large-bore actuator features a 125 mm bore and a 70 mm stroke. The four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir to maximize service life. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures.
Equipped with a G1/2 port and a 32 mm rod, it operates at speeds of 30-500 mm/s. Plan for about 3682 N of real work at 0.5 MPa, which safely lifts roughly 313 kg vertically with a 2:1 margin. This SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches.
Airtac SGC Standard Cylinder SGC125X70TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X70TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X70TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X70TC Is Used
Press Ejection
Uses the 6136 N push force at 0.5 MPa to eject formed metal parts from a stamping die within a 70 mm travel distance.
Pallet Stopping
Deploys the TC trunnion mount to act as a robust pneumatic stop gate for heavy unit loads on a conveyor line.
Clamp Actuation
Secures large workpieces inside machining centers where the 125 mm bore provides the necessary holding thrust.
Is the Airtac SGC Standard Cylinder SGC125X70TC the Right Cylinder?
When sizing this 125 mm bore option, verify if the 6136 N output at 0.5 MPa meets your motion requirements; if you need more power, stepping up to the 160 mm bore yields 10053 N under the same pressure. As the smallest bore in the SGC family, there is no smaller standard option below it. The TC trunnion mount supplied here is ideal for pivoting loads, but remember a plain cylinder drifts when air is lost or the valve is centered—the end cushions only decelerate the piston, so add an external rod lock or pilot-operated check valve if you must hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X70TC FAQ
This 125 mm bore cylinder features a G1/2 port and delivers a push force of 6136 N and a pull force of 5734 N at 0.5 MPa. At 0.7 MPa, the push increases to 8590 N and the pull to 8028 N. The theoretical maximum force is 1251 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, meaning it cannot accept CMSG, DMSG or EMSG switches. If you require position sensing, you must select the -S variant. The unit does feature a genuine ISO 15552 mounting interface for fixture interchangeability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X70TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.