Airtac SGC Standard Cylinder SGC125X90S
The AirTAC Airtac SGC Standard Cylinder SGC125X90S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 90mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke90 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X90S
Delivering 6136 N of push force at 0.5 MPa, this double-acting large-bore cylinder brings genuine ISO 15552 mounting-interface interchangeability to heavy fixtures. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life. Because this SKU includes the -S magnet, it is ready for CMSG, DMSG or EMSG position switches.
With a 125 mm bore, 90 mm stroke and a G1/2 port, plan for about 3682 N of real work at 0.5 MPa, which lifts roughly 313 kg vertically with a 2:1 safety margin. The adjustable 40 mm air cushions at both ends absorb kinetic energy near the stroke limits, and the TPU seal handles temperatures from -20 to +70 C (a Viton H option extends this to 150 C).
Airtac SGC Standard Cylinder SGC125X90S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X90S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X90S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X90S Is Used
Press Ejection
Supplies the 6136 N push at 0.5 MPa needed to eject formed metal parts from a 125-ton stamping press bed.
Pallet Diversion
Raises a 90 mm diverter arm to reroute heavy industrial pallets on a high-speed packaging conveyor line.
Vacuum Lifter Actuation
Drives the main tilt mechanism on a vacuum lifting beam handling sheet steel, safely managing the 313 kg vertical lift margin.
Is the Airtac SGC Standard Cylinder SGC125X90S the Right Cylinder?
As the smallest bore in the SGC family, the 125 mm size is the entry point for large-bore thrust; stepping up to the 160 mm bore raises push force to 10053 N at 0.5 MPa. If air pressure drops or the valve centres, the piston drifts because the standard cushion only decelerates the stroke end rather than locking the load—add an external rod lock or pilot-operated check valve for suspended loads. The built-in -S magnet pairs directly with CMSG, DMSG or EMSG sensors, and standard LB, FA or TC mounts fit the ISO 15552 interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X90S FAQ
The SGC125X90S features a 125 mm bore and a G1/2 air port. It generates 6136 N push and 5734 N pull at 0.5 MPa, 8590 N push and 8028 N pull at 0.7 MPa, with a theoretical maximum force of 1251 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops into existing large-bore fixtures. Its four steel tie rods clamp the barrel to the covers, providing the high rigidity needed to handle large-bore thrust without flexing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.