Airtac SGC Standard Cylinder SGC160X100STC
The AirTAC Airtac SGC Standard Cylinder SGC160X100STC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X100STC
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 port and M36x2.0 rod thread accommodate high airflow for rapid cycling.
For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches. The default TPU seal handles -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X100STC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X100STC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X100STC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X100STC Is Used
Press Fit Assembly
Drives heavy bearings into automotive housings, utilizing the 10053 N push force to seat components reliably without hydraulic fluid.
Pallet Stopper Gate
Acts as a robust pneumatic stop on high-mass conveyor lines, using the TC trunnion mount to handle heavy side-loads during pallet halting.
Heavy Carton Flap Folder
Folds thick corrugated flaps on large industrial packaging lines, where the 9425 N pull force securely retracts the mechanism.
Is the Airtac SGC Standard Cylinder SGC160X100STC the Right Cylinder?
When sizing this 160 mm bore unit, compare it against its neighbors: a 125 mm bore yields 6136 N push at 0.5 MPa, while stepping up to a 200 mm bore provides 15708 N. This model includes a TC trunnion mount, utilizing the standardized ISO 15552 mounting interface to drop directly into existing large-bore fixtures. If your application requires position holding on air loss, note that the standard piston will drift; the end cushions only decelerate motion and do not act as a brake, so an external rod lock or pilot-operated check valve is required for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X100STC FAQ
This 160 mm bore cylinder features a G3/4 air port and generates 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, the -S suffix denotes a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. The TC trunnion mount utilizes standard ISO 15552 mounting interface dimensions, ensuring dimensional interchangeability with standard large-bore fixtures and accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X100STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.