Airtac SGC Standard Cylinder SGC160X130S
The AirTAC Airtac SGC Standard Cylinder SGC160X130S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X130S
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy automation tasks with ease. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life.
Equipped with a G3/4 air port and an M36x2.0 piston rod, the 160 mm bore operates at speeds of 30-500 mm/s. Because this SKU includes the -S magnet, it fully supports CMSG, DMSG, and EMSG position switches. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
Airtac SGC Standard Cylinder SGC160X130S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X130S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X130S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X130S Is Used
Press Die Ejection
Provides the robust 10053 N push force needed to eject heavy stamped metal parts from press dies reliably.
Pallet Stopper Gate
Acts as a heavy-duty pneumatic stopper gate on high-mass pallet conveyors, absorbing kinetic energy via its 50 mm cushions.
Injection Mold Clamping
Secures injection molding tooling components, utilizing the 160 mm bore's 9425 N pull force at 0.5 MPa for firm retraction.
Is the Airtac SGC Standard Cylinder SGC160X130S the Right Cylinder?
When sizing this 160 mm bore, note the smaller 125 mm option yields 6136 N push, whereas the larger 200 mm bore provides 15708 N at 0.5 MPa. If your machinery loses air pressure or the valve centers, the piston will drift; an external rod lock or pilot-operated check valve is required to hold a suspended load securely. The adjustable air cushion at both ends only decelerates the stroke near the end caps.
The 130 mm stroke falls well under the 500 mm side-load threshold, so standard mounting is acceptable. You can utilize LB foot brackets, FA/FB flanges, CA/CB clevises, or TC trunnion hardware conforming to the ISO 15552 mounting interface for seamless fixture integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X130S FAQ
The 160 mm bore features a G3/4 port and delivers 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, and a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, the -S suffix means a piston magnet is built-in, allowing CMSG, DMSG, or EMSG switches to track the 130 mm stroke. Its ISO 15552 mounting interface ensures dimensional interchangeability with standard large-bore fixtures and accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.