Airtac SGC Standard Cylinder SGC160X1400
The AirTAC Airtac SGC Standard Cylinder SGC160X1400 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 1400mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke1400 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X1400
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 air port feeds the 40 mm piston rod, and the unit travels at 30-500 mm/s.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of actual work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. Standard TPU seals handle -20 to +70 C, though Viton H raises this to 150 C.
Airtac SGC Standard Cylinder SGC160X1400 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X1400 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 1400 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X1400
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X1400 Is Used
Pallet Transfer Pusher
Shoves heavy pallets along a 1400 mm accumulation line, utilizing the 10053 N push force to overcome friction without stalling.
Automated Warehousing Gate
Actuates a large loading dock door across a 1.4 meter span, relying on the rigid tie-rod construction to maintain alignment.
Press Ejection System
Ejects finished metal parts from a stamping press, using the 9425 N pull force at 0.5 MPa to retract the 40 mm rod reliably.
Is the Airtac SGC Standard Cylinder SGC160X1400 the Right Cylinder?
When sizing this 160 mm bore, compare it against the smaller 125 mm option (6136 N push @0.5 MPa) or the larger 200 mm bore (15708 N push @0.5 MPa) to match your exact load. At a 1400 mm stroke, the extended rod is highly susceptible to bending under side loads, so an external guide bearing is strongly recommended to prevent premature seal failure.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered; the adjustable 50 mm air cushions only decelerate the piston near the end caps and do not act as a holding brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X1400 FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must select the -S variant to use CMSG, DMSG, or EMSG switches. However, all versions share the same ISO 15552 mounting interface, allowing you to drop the cylinder into existing large-bore fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X1400
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.