Airtac SGC Standard Cylinder SGC160X195
The AirTAC Airtac SGC Standard Cylinder SGC160X195 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X195
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy automation tasks with ease. Four steel tie rods clamp the aluminium barrel to the covers, providing the high rigidity needed for large-bore thrust, while the two-way piston seal maintains an internal oil reservoir for long service life.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of actual work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The unit features a G3/4 air port and a 195 mm stroke.
Airtac SGC Standard Cylinder SGC160X195 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X195 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X195
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X195 Is Used
Press Ejection Systems
Supplies the 10053 N push force required to eject formed metal parts from heavy stamping presses reliably.
Pallet Diverters
Actuates heavy-duty diverters on packaging lines, moving loaded pallets laterally with precise 195 mm travel.
Lift Gate Actuation
Raises and lowers industrial loading dock gates, easily handling the 512 kg vertical lift capacity within safety margins.
Is the Airtac SGC Standard Cylinder SGC160X195 the Right Cylinder?
When sizing this 160 mm bore option, note that stepping down to the 125 mm bore drops the 0.5 MPa push force to 6136 N, whereas moving up to the 200 mm bore increases it to 15708 N. Since this 195 mm stroke falls under the 500 mm threshold, severe side-load risks are minimized, but standard rod alignment practices still apply.
Without an -S magnet option, this particular model cannot support magnetic sensors. Furthermore, the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not function as a braking mechanism. If your application requires the load to be held statically during air loss, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X195 FAQ
The SGC160X195 delivers a push force of 10053 N and a pull force of 9425 N at 0.5 MPa. At 0.7 MPa, push is 14074 N and pull is 13194 N. The theoretical maximum force is 2050 kgf at 1.0 MPa. It uses a G3/4 air port and a 40 mm piston rod.
No, because this specific SKU does not include the -S magnet, it cannot support CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for position sensing. It is dimensionally interchangeable per the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.