Airtac SGC Standard Cylinder SGC160X200SH
The AirTAC Airtac SGC Standard Cylinder SGC160X200SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X200SH
Delivering 10053 N of push force at 0.5 MPa, this large-bore actuator handles heavy industrial loads with ease. The Ø160 mm barrel is clamped between the front and rear covers by four steel tie rods, creating a highly rigid structure that withstands large-bore thrust. A two-way piston seal maintains an internal oil reservoir to ensure long operational life. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
This double-acting tie-rod cylinder is dimensionally interchangeable per the ISO 15552 mounting interface, dropping directly into existing large-bore fixtures. The H suffix denotes a Viton seal upgrade, extending the operating temperature range from -20 to +70 C up to 0-150 C for high-heat environments. It features a G3/4 air port, an M36x2.0 rod-end thread, and adjustable 50 mm air cushions at both ends to decelerate the piston smoothly. Because the code includes an S, the built-in piston magnet is present and fully compatible with CMSG, DMSG, and EMSG switches.
Airtac SGC Standard Cylinder SGC160X200SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X200SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X200SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X200SH Is Used
Injection Mold Clamping
Utilizes the 10053 N push force to secure heavy injection mold halves, with the Viton seal surviving elevated ambient heat near the barrel heaters.
Pallet Stopper Gate
Acts as a robust 200 mm stroke stop gate on high-capacity conveyor lines, using the CMSG sensor to confirm gate position for the PLC.
Metal Press Ejection
Ejects dense forged parts from a hydraulic press, relying on the 50 mm adjustable air cushions to absorb kinetic energy at stroke end.
Is the Airtac SGC Standard Cylinder SGC160X200SH the Right Cylinder?
When sizing this 160 mm bore actuator, compare your requirements against the neighboring SGC bores: the smaller Ø125 generates 6136 N push at 0.5 MPa, while the larger Ø200 provides 15708 N. If your system loses air or the valve is centered, the piston will drift and drop the load because the air cushions only decelerate motion near stroke end without acting as a brake. To maintain vertical position, install an external rod lock or a pilot-operated check valve. The 200 mm stroke is well within the 1500 mm maximum, but for any application exceeding 500 mm, adding external guide rails prevents rod bending under side loads. The -S magnet allows seamless sensor integration, while the -H Viton seal handles extreme heat up to 150 C.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X200SH FAQ
The Ø160 mm bore provides a push force of 10053 N and a pull force of 9425 N at 0.5 MPa. At 0.7 MPa, push is 14074 N and pull is 13194 N. The theoretical maximum force is 2050 kgf at 1.0 MPa. It uses a G3/4 air port and an M36x2.0 piston rod thread.
Yes, the tie-rod construction is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard FA flanges, CA clevises, and TC trunnions. The S suffix provides a piston magnet for CMSG, DMSG, or EMSG switches. The H suffix equips the cylinder with Viton seals, raising the maximum operating temperature to 150 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.