Airtac SGC Standard Cylinder SGC160X210
The AirTAC Airtac SGC Standard Cylinder SGC160X210 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 210mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke210 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X210
Delivering 10053 N of push force at 0.5 MPa, this 160 mm bore tie-rod actuator handles heavy automation tasks with ease. It is a double-acting ISO 15552 standard cylinder, meaning its mounting interface drops directly into existing large-bore fixtures and accessory kits. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life. The unit features a G3/4 air port and an M36x2.0 rod thread.
Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of usable work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. Standard TPU seals operate across a -20 to +70 C range, with Viton H available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X210 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X210 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X210
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X210 Is Used
Press Die Ejection
Provides the 10053 N push force required to eject heavy stamped parts from large press dies, utilizing the 210 mm stroke to clear the tooling bed safely.
Pallet Stopper Gate
Acts as a robust stopping barrier on high-mass conveyor lines, using its tie-rod rigidity to absorb the impact of incoming palletized goods without flexing.
Heavy Fixture Clamping
Secures large machined castings inside machining centers, delivering consistent 9425 N pull force at 0.5 MPa to hold components firmly against cutting forces.
Is the Airtac SGC Standard Cylinder SGC160X210 the Right Cylinder?
When sizing this 210 mm stroke unit, compare its 10053 N output at 0.5 MPa against the smaller Ø125 bore (6136 N) or the larger Ø200 bore (15708 N) to match your exact load. At 210 mm of travel, mounting style dictates performance: LB foot, FA/FB flange, or TC trunnion brackets must be chosen to minimize side loading. If the application demands position feedback, step up to an -S magnet variant to enable CMSG/DMSG/EMSG sensors. Remember that standard air cushions only decelerate the piston near stroke end; they do not function as a lock. To prevent drift on air loss or valve centring, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X210 FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot host CMSG, DMSG, or EMSG switches. You would need to select the -S variant for magnetic sensing. The unit is built with an ISO 15552 mounting interface and a four steel tie-rod construction for high rigidity.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.