Airtac SGC Standard Cylinder SGC160X210S
The AirTAC Airtac SGC Standard Cylinder SGC160X210S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 210mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke210 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X210S
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 port and M36x2.0 rod thread handle the high airflow and mechanical load required by large-bore pneumatics.
Because the -S suffix indicates a built-in piston magnet, this unit directly supports CMSG, DMSG, and EMSG position switches. For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. You can also specify Viton H seals if your environment demands 0-150 C high-temperature operation.
Airtac SGC Standard Cylinder SGC160X210S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X210S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X210S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X210S Is Used
Press Fit Assembly
Drives heavy bearings into automotive housings, utilising the 10053 N push force at 0.5 MPa to seat components reliably.
Pallet Dispenser
Separates stacked pallets in high-throughput logistics lines, where the 512 kg vertical lift capacity handles heavy wood or plastic bases.
Injection Mould Clamp
Actuates secondary mould locks or core pulls on large plastic injection machines, benefiting from the rigid four tie-rod construction.
Is the Airtac SGC Standard Cylinder SGC160X210S the Right Cylinder?
When sizing this 160 mm bore, compare it against its neighbours: the 125 mm bore yields 6136 N of push at 0.5 MPa, while the 200 mm bore jumps to 15708 N. This 210 mm stroke version sits well below the 1500 mm standard maximum, keeping the 40 mm rod highly stable without requiring external guides. The ISO 15552 mounting interface lets you drop it into existing large-bore fixtures using LB foot, FA flange, or TC trunnion accessories.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centred, as the adjustable air cushion only decelerates the piston near stroke end rather than locking it. To suspend a load safely, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X210S FAQ
This 160 mm bore cylinder features a G3/4 air port. It generates 10053 N push and 9425 N pull at 0.5 MPa, increasing to 14074 N push and 13194 N pull at 0.7 MPa. The theoretical maximum force is 2050 kgf at 1.0 MPa.
Yes, the -S magnet allows direct mounting of CMSG, DMSG, or EMSG switches. Additionally, its ISO 15552 mounting interface means it is dimensionally interchangeable with standard large-bore fixtures, simplifying retrofits and spare parts inventory without tying you to a single brand.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.