Airtac SGC Standard Cylinder SGC160X275S
The AirTAC Airtac SGC Standard Cylinder SGC160X275S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 275mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke275 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X275S
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore cylinder brings serious muscle to heavy automation. The Ø160 mm bore operates on a G3/4 port and uses an M36x2.0 rod thread. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
Built to ISO 15552 mounting-interface dimensions, it drops directly into existing large-bore fixtures without redesign. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Because this SKU includes the -S magnet, you can mount CMSG, DMSG or EMSG sensors directly for position detection.
Airtac SGC Standard Cylinder SGC160X275S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X275S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X275S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X275S Is Used
Press Ejection
Provides the 10053 N push at 0.5 MPa needed to eject formed metal parts from heavy stamping presses.
Pallet Handling
Uses its 275 mm stroke and 512 kg vertical lift capacity to lift and transfer loaded pallets between conveyor zones.
Automated Clamping
Secures large automotive castings during machining, relying on the rigid four-tie-rod construction to resist deflection.
Is the Airtac SGC Standard Cylinder SGC160X275S the Right Cylinder?
When sizing this 160 mm bore, compare it against its neighbours: the smaller Ø125 bore yields 6136 N push at 0.5 MPa, while the larger Ø200 bore provides 15708 N. If your load drops when air is removed or the valve centres, note that this standard cylinder will drift; the end cushions only decelerate the piston near stroke limits and do not act as a brake. For suspended loads, install an external rod lock or pilot-operated check valve. This 275 mm stroke falls below the 500 mm side-load threshold, but always ensure the M36x2.0 rod end aligns with the load to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X275S FAQ
This Ø160 mm bore model features a G3/4 air port and delivers 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, and a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in piston magnet for CMSG, DMSG or EMSG switches. It is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to use the same fixtures and accessories as any standard ISO 15552 large-bore cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X275S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.