Airtac SGC Standard Cylinder SGC160X350
The AirTAC Airtac SGC Standard Cylinder SGC160X350 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X350
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface for seamless fixture integration. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed for heavy thrust, while a two-way piston seal maintains an internal oil reservoir for extended lifespan. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
This 160 mm bore unit features a 40 mm piston rod, a G3/4 air port, and an M36x2.0 rod-end thread. It operates at speeds of 30-500 mm/s and uses adjustable 50 mm air cushions at both ends to decelerate the payload smoothly. The standard TPU seal handles temperatures from -20 to +70 C, though a Viton H option extends this range to 0-150 C for high-heat environments.
Airtac SGC Standard Cylinder SGC160X350 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X350 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X350
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X350 Is Used
Press Die Ejection
Provides the robust 10053 N push force required to eject heavy stamped metal parts from large press dies.
Pallet Stopper Gate
Acts as a heavy-duty pneumatic stop gate on high-mass conveyor lines, absorbing kinetic energy via its 50 mm cushions.
Injection Mold Clamping
Secures large injection molding tooling halves with reliable thrust throughout the 350 mm clamping stroke.
Is the Airtac SGC Standard Cylinder SGC160X350 the Right Cylinder?
When sizing this 350 mm stroke model, compare its 10053 N push force at 0.5 MPa against the smaller Ø125 bore (6136 N) and the larger Ø200 bore (15708 N) to ensure optimal matching. Because this unit lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG magnetic sensors; if position detection is required, select the -S magnet variant. At 350 mm of travel, side-load risks increase, so external guide rails should be used to prevent rod bending and premature seal wear.
Remember that a standard double-acting cylinder will drift if air pressure drops or the valve is centered, as the end cushions only slow the piston near stroke limits and act purely as deceleration buffers. To suspend a load safely during an air loss event, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X350 FAQ
The SGC160X350 has a G3/4 air port and an M36x2.0 rod thread. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
No, this specific SKU lacks the -S magnet option, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches. You must choose an -S variant if electronic position sensing is required for your ISO 15552 mounting setup.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.