Airtac SGC Standard Cylinder SGC160X350STC
The AirTAC Airtac SGC Standard Cylinder SGC160X350STC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X350STC
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers, providing the rigidity needed to handle large-bore thrust without flexing. The two-way piston seal retains an oil reservoir for continuous lubrication and extended service life.
Equipped with a 350 mm stroke, a Ø40 mm piston rod, and a G3/4 air port, it integrates seamlessly into existing setups via the standardized ISO 15552 mounting interface. The -S suffix denotes a built-in magnet for CMSG, DMSG, or EMSG position switches. Plan for roughly 6032 N of real work at 0.5 MPa, which translates to lifting about 512 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC160X350STC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X350STC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X350STC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X350STC Is Used
Press Ejection Systems
Provides the robust 10053 N output required to eject formed metal parts from heavy stamping presses.
Pallet Stopper Gates
Controls heavy pallet flow on conveyor lines by actuating high-capacity stopping gates with its 350 mm stroke.
Automated Clamping Jigs
Secures large composite molds during curing, utilizing the TC trunnion mount to accommodate angular alignment.
Is the Airtac SGC Standard Cylinder SGC160X350STC the Right Cylinder?
When sizing this 160 mm bore unit, compare it against its neighbors: the smaller Ø125 generates 6136 N push, while the larger Ø200 provides 15708 N at 0.5 MPa. This model includes a TC trunnion mount, ideal for pivoting loads, and the integrated magnet supports electronic sensors. For vertical or suspended loads, remember that a standard cylinder drifts when air is lost or the valve is centered—the end cushions only decelerate the piston near stroke limits, so add an external rod lock or pilot-operated check valve for secure holding. At 350 mm, side loads are moderate, but keeping the load guided prevents rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X350STC FAQ
This 160 mm bore cylinder features a G3/4 air port and a M36x2.0 rod thread. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, meaning it drops into the same fixtures as other ISO 15552 large-bore cylinders. This unit specifically uses a TC trunnion mount, and its -S magnet allows CMSG, DMSG, and EMSG switches to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X350STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.