Airtac SGC Standard Cylinder SGC160X350TC
The AirTAC Airtac SGC Standard Cylinder SGC160X350TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X350TC
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy automation. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
The 160 mm bore uses a G3/4 port and a 40 mm rod with an M36x2.0 thread. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. The default TPU seal handles -20 to +70 C, with Viton H available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X350TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X350TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X350TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X350TC Is Used
Press Ejection
Uses the 10053 N push force at 0.5 MPa to eject formed metal parts from heavy stamping presses reliably.
Pallet Handling
Lifts and positions loaded pallets up to 512 kg vertically with a 2:1 safety margin using the TC trunnion pivot.
Automated Assembly
Actuates large industrial clamps and fixtures where the 14074 N push at 0.7 MPa secures components for robotic welding.
Is the Airtac SGC Standard Cylinder SGC160X350TC the Right Cylinder?
This 160 mm bore bridges the 125 mm (6136 N push @0.5 MPa) and 200 mm (15708 N push @0.5 MPa) sizes, giving you a step up in thrust without jumping to the largest footprint. The integrated TC trunnion mount provides pivot articulation along the ISO 15552 mounting interface. Since this model has no -S magnet, external proximity sensors must be used if position detection is required.
At 350 mm of stroke, guide the load carefully to prevent rod bending and side-load wear. Remember that a standard cylinder drifts when air is lost or the valve is centred; the adjustable 50 mm air cushions only decelerate the piston near stroke end. To hold a load securely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X350TC FAQ
The 160 mm bore features a G3/4 port. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for internal magnetic sensing. The unit is dimensionally interchangeable per the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X350TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.